Skip to main content
Home » Jeep Lighting, Lenses, Bulbs » Tail Lights » LED Tail Lights » Oracle Lighting V2 Flush Mount LED Tail Lights
« Back to product
How does the brightness of the back up lights compare to the bumper mounted LED backup lights: Oracle Lighting 5874-504 Rear Bumper LED Reverse Lights for 18-27 Jeep Wrangler JL - Quadratec Item No: 97009-9037
The bumper-mounted kit delivers a more concentrated, lower-level ground flood, while the V2 tail lights provide high-mounted, wide-angle reverse illumination. Pairing both creates an ultimate dual-source setup that completely eliminates shadows. The Tail Lights (V2 Flush Mount): Feature 12 high-powered reverse LEDs per light, offering a massive, crisp upgrade over factory lighting. The Bumper-Mounted Lights feature 22 high-powered LEDs pushing over 1,000 raw lumens with an optic-focused wide beam. Because they are mounted lower down on the bumper, they project an intense, low-angle ground flood designed specifically to dramatically improve backup camera clarity.
Do these taillights come with resisters to work with the CANbus system on newer jeeps (2026)?
Yes, they do! The Oracle Lighting V2 Flush Mount LED Tail Lights come with built-in resistors and a plug-and-play design engineered to integrate seamlessly with the CANbus system on newer Jeep Wranglers without throwing any error codes or hyper-flashing.
The tail light is out. The brake light still functions. Are you suggesting I need to replace the entire lighting assembly? There are no replacement bulbs?
Correct, because these are sealed LED units, individual bulbs cannot be replaced. If a specific circuit like the running tail light fails while the rest works, you would typically need to replace the assembly. However, before doing that, it's worth checking the wiring connections, plug-and-play connectors, and the built-in resistors to ensure there isn't a loose connection or a minor power delivery issue causing that specific circuit to drop out.
I have a 2021 JT with LED taillights. I am replacing a faulty lamp assembly, will I have issues with a fault code on the dash?
No, you won't get any fault codes or dashboard errors. Since your Jeep already came with factory LED tail lights and you are installing a direct plug-and-play replacement assembly (like the Oracle Lighting 5884-504-T V2 Flush Mount LED Tail Lights) with built-in resistors, the CANbus system will read the load correctly and operate normally without throwing any error codes or hyper-flashing.
Will this fit on the 2024 JLU 4xe?
Yes, they will.
What happens if I have a brake light out? Can I replace it or do I need a whole new assembly?
You'd need the whole assembly.
Will these lights work on my 2023 sport wrangler, not sure about the cross track feature
Yes, they will fit a 2023 JL/JLU Sport.
When used to upgrade from factory halogen, will any programming be required for these to work properly? Thanks
Yes, you will want to reprogram for the change to LED lights. Superchips Flashpaq F5 Programmer for 18-25 Jeep Wrangler JL with 3.6L
Where are people mounting the 2 reflectors that you get with the lights? Not clear to me in the video.
The resistors are included to prevent hyper-flashing of the turn signals, and they need to be mounted on a metal surface away from any plastic or wiring. One possible location is on the inner side of the tail light housing. Thanks for your inquiry. At the 3:30 mark in the video the remove adhesive cover and locate a tab it adheres to inside the body. Sorry for any confusion.
Will installing them void the factory warranty
No, it will not. Thanks for your inquiry.