Reviews for TACTIK 9" Gen 2 LED Headlights with DRL Halo and Plug & Play Wiring Harness for 18-25 Jeep Wrangler JL & Gladiator JT
Outstanding lights. Easy install and fit like a glove. Had to set my headlights to LED as I had the factor halogen so either need a tazer mini or the dealer to help you out.
Huge upgrade versus the factory halogens, much better visibility at night. Make sure to get the optional harness for the DRL and turn signal function.
Significant upgrade over stock halogens. Also upgraded fender lights to LED so had the fender liners out. Made adding the DRL and turn signal a snap. The additional wiring was simple even for a novice.
2020 Jeep Rubicon
If you aren’t worried about connecting the integrated signal light to the DRL harness, the operation is a breeze. The light adjuster is easy to use and locate once installed. An allen wrench was used for the fine tuning. I did the DRL harness option, I had a problem looking for 18 gauge wire so I used 16 gauge and thank goodness the heat shrink connectors came with the kit. I used 14-16 male connectors that worked with attaching to the light. Spade connectors will work too. Thank goodness for the step by step video, but the red tab plugs that were needed for the DRL plugs, they were tucked away for a challenge. The fender well will need to be opened up to access the connector. The connectors on the driver side and passenger side are lined up to the back of the wheel. The driver side connector gave me a pain because it could be felt from under the hood but will be easier to disconnect when opening up the fender well. Plus the connector was mounted to the Jeep which made it a little tough and a small flat head screw driver was needed to push the latch up so the plugs could separate. Some of the fender well push pins broke when removing so mindful of having to replace the pins. I am impressed with the light performance and a huge difference can be noticed versus the factory lights. I hope this helps.
They are very nice looking headlights.
Regarding the DRL feature, if your Jeep wasn't equipped with DRL, you can acquire a programmer from Z Automotive (Tazer JL Mini for JL and JT) which allows you to enable the DRL feature. No need to bother with a dealer who will likely just waste your time and patience.
WOW! I am so beyond amazed by this product! It took us maybe an hour to make everything work! (Important note : These headlights requires the Quadratec daytime running light DRL adapter wiring harnesses (2) to work with the turn signal feature, make sure to order them if you want to have the integrated turn signals). I strongly recommend them specially for the integrated turn signals, such a cool feature.