« Back to product
Amie S.
Does this fit on 25 Willy's 4xe?
The Rugged Ridge Sherpa Roof Rack System (11703.23) is technically compatible with the 2025 Jeep Wrangler Willys 4xe, but there are two critical installation conflicts you should consider for your specific trim and hybrid powertrain.
1. The Rear Bumper Conflict
The Sherpa rack mounts to the body tub by wrapping around the rear corners. While it is a "no-drill" system, the mounting brackets often interfere with the rear bumper's closeout panels.
Willys Trim: Since your 2025 Willys 4xe comes with high-clearance fenders and specific bumper styling, you may need to trim or remove the plastic bumper filler panels to allow the rack's support tubes to pass through to the frame mounting points.
Aftermarket Bumpers: If you have already upgraded to a steel rear bumper, the rack may require complete bumper removal during installation to seat the brackets correctly.
2. 4xe-Specific Clearances
While the external roll cage and body dimensions of the 4xe are identical to the standard gas models, the charging port on the front driver-side cowl is the primary area of concern.
Front Light Bar Hoop: The front section of the Sherpa rack mounts to the A-pillar/cowl area. You must ensure the mounting bracket does not obstruct the 4xe charging port door. Some users find that the bracket sits close but allows the door to open fully; however, it can make plugging in slightly more cramped.
1. The Rear Bumper Conflict
The Sherpa rack mounts to the body tub by wrapping around the rear corners. While it is a "no-drill" system, the mounting brackets often interfere with the rear bumper's closeout panels.
Willys Trim: Since your 2025 Willys 4xe comes with high-clearance fenders and specific bumper styling, you may need to trim or remove the plastic bumper filler panels to allow the rack's support tubes to pass through to the frame mounting points.
Aftermarket Bumpers: If you have already upgraded to a steel rear bumper, the rack may require complete bumper removal during installation to seat the brackets correctly.
2. 4xe-Specific Clearances
While the external roll cage and body dimensions of the 4xe are identical to the standard gas models, the charging port on the front driver-side cowl is the primary area of concern.
Front Light Bar Hoop: The front section of the Sherpa rack mounts to the A-pillar/cowl area. You must ensure the mounting bracket does not obstruct the 4xe charging port door. Some users find that the bracket sits close but allows the door to open fully; however, it can make plugging in slightly more cramped.
Coatsjw .
Are the cross bars adjustable?
The Rugged Ridge 11703.23 Sherpa Roof Rack System uses fixed crossbars, meaning they do not slide along the length of the side rails to adjust their positioning.
Michael S.
What is the static and dynamic weight this rack can hold?
The weight ratings for this specific rack (Part #11703.23) are as follows:
Dynamic Weight Capacity: 300 lbs. * This is the maximum weight the rack can safely carry while the vehicle is in motion. It is sufficient for heavy items like kayaks, canoes, and large storage cases.
Static Weight Capacity: 600+ lbs. (Estimated)While Rugged Ridge primarily advertises the 300 lb. dynamic load, the static capacity (when parked) is significantly higher. It is engineered to support the weight of a rooftop tent and occupants, which typically requires a static limit of at least 600 lbs.
Dynamic Weight Capacity: 300 lbs. * This is the maximum weight the rack can safely carry while the vehicle is in motion. It is sufficient for heavy items like kayaks, canoes, and large storage cases.
Static Weight Capacity: 600+ lbs. (Estimated)While Rugged Ridge primarily advertises the 300 lb. dynamic load, the static capacity (when parked) is significantly higher. It is engineered to support the weight of a rooftop tent and occupants, which typically requires a static limit of at least 600 lbs.
Olivia P.
Would this be compatible with a 2024 Wrangler that has the Sky One Touch Soft Top?
The Rugged Ridge 11703.23 Sherpa Roof Rack System for the 2018-2023 Jeep Wrangler JL Unlimited is likely NOT fully compatible with the 2024 Wrangler JL Unlimited that has the Sky One-Touch Soft Top without some limitations. While the Sherpa rack might physically mount to your 2024 JL Unlimited with the Sky One-Touch, the crossbars of the rack will likely prevent the Sky One-Touch roof from fully retracting.
G V.
"Rugged Ridge 11703.23 Sherpa Roof Rack System for 18-24"
Would this rack system work with my Jeep Wrangler Willys soft top 4 door 2021
Yes, it will work with a soft top as it is body-mounted.
Raymond C.
Is the Sherpa Roof Rack System compatible with the 2019 JL power top?
Yes, it is because it is body-mounted. HOWEVER, crossbars will interfere with the opening of the One Touch Skytop. We'd exercise extreme caution when adding accessories to the top of a Jeep with the One Touch Skytop.