« Back to product
Matthew B.
Are they compatible with the diesel JT?
The TACTIK Aluminum Inner Fender Liners for the front are technically compatible with the Jeep Gladiator JT; however, diesel models (both JL and JT) present a specific fitment challenge that may require modification.
Diesel Compatibility Details
While the front wheel wells of the Wrangler JL and Gladiator JT are identical in shape, the 3.0L EcoDiesel engine includes a significantly larger windshield washer fluid reservoir located behind the passenger-side inner fender.
Standard vs. Diesel Fitment: Most "standard" inner fender liners, including the TACTIK set, are designed around the smaller reservoir found in gas models (3.6L or 2.0L).
The Conflict: On a diesel JT, the rear section of the passenger-side liner often makes contact with this larger reservoir, preventing a flush bolt-on installation.
Potential Solution: Many owners successfully install these by either relocating the washer fluid reservoir using an aftermarket kit or performing minor trimming of the aluminum liner to clear the diesel-specific components.
Diesel Compatibility Details
While the front wheel wells of the Wrangler JL and Gladiator JT are identical in shape, the 3.0L EcoDiesel engine includes a significantly larger windshield washer fluid reservoir located behind the passenger-side inner fender.
Standard vs. Diesel Fitment: Most "standard" inner fender liners, including the TACTIK set, are designed around the smaller reservoir found in gas models (3.6L or 2.0L).
The Conflict: On a diesel JT, the rear section of the passenger-side liner often makes contact with this larger reservoir, preventing a flush bolt-on installation.
Potential Solution: Many owners successfully install these by either relocating the washer fluid reservoir using an aftermarket kit or performing minor trimming of the aluminum liner to clear the diesel-specific components.
Jeremy E.
Will the passenger side install correctly with the safety plate thats behind the tire on newer JTs?
To install the TACTIK Aluminum Inner Fender Liners on your newer Jeep Gladiator JT, you will likely need to remove or modify the factory tire deflector bracket (the "safety plate") located behind the passenger-side front tire.
Jim V.
Is this one piece
Yes, they are.
Brian B.
Is it possible to install this without removing the fender flares?
No. You will need to remove the fenders to install the new liners.
Cody H.
Will these fit the JL diesel?
Yes, they will.
James T.
Will these work on 2020 Gladiator with 35” tires and no lift?
Yes, the front set will work for your JT.
Curtis H.
Will these work with (JLU) Smittybilt XRC fenders?
Yes, they will.
Kim L.
I have a 2018 Jeep JL unlimited rubicon and don't want to change/chop my fenders. Will this work as replacement to factory liners without doing modifications to the factory fenders?
thanks
Yes, these can be used with factory fender flares with no modifications.
Canyon N.
Will the front set fit a 2022 Gladiator Mojave?
The front set of Quadratec Aluminum Inner Fender Liners, part number 12247-1010, will fit a 2022 Jeep Gladiator Mojave.
Mandy H.
Has anyone installed these with the Mopar Extreme Recon Fender Flare Extensions or know if they will work with them?
Yes, they will work with Mopar Extreme Recon Fender Flare Extensions.