Reviews for Quadratec Gen II Stealth LED Interior Mount 50” Light Bar for 18-24 Jeep Wrangler JL & Gladiator JT
Super easy install compared to when I installed an external 50" light bar on a-pillar brackets previously. Light is super bright and having the switch right on the bar right in front of you is nice and frees up one of your factory aux switches. Being able to go white or yellow too is a big bonus. My only suggestion would be to add a warning to the install instructions during the step where your attaching the light bar to the brackets with the smaller bolts. Spread a towel across your dash! I dropped one of the screws and it went down the defroster vent on the passenger side. Luckily I had some matching bolts. I would definitely recommend this light bar.
Works fine, and it is not too complex to install.
Love the Stealth Light. Clean look, install is easy, and provides a broad light output. Also offers enough adjustability to make sure there is no light wash coming into the cabin.
Love my led interior light, everyone always ask me where I got it.
WOW, these are bright, great fit, no light wash on the windshield.
I like these lights. No more wind noise from the outside light bar!!! Detailed directions and easy to install. The installation video was spot on!! Highly recommend!
Fairly straight forward install but I always seem to encounter glitches. The plug on the bar was barely accessible. Had to nudge it out with a trim tool. The connector on the 12 V outlet needed to be unlocked with a flat blade screw driver. Otherwise, working fine. Only concern now is longer term how will the electronics stand up to the sun exposure. I measured the surface temperature (with lights off) of 140F with my IR thermometer on a sunny day with outside temp 70F. Time will tell.
Looks great and great lighting. Pretty easy to install. Watch the install video on Quadratec website and get all the tools ready before starting. It will take about an hour to install. The only issue I had was reinstalling the grab bar trim after the light was installed. I installed the light loosely on both side and then installed the grab bar trim but it kept unplugging the light. My suggestion would be to hang the light from the drivers side, install the grab bar trim, then attached the passenger side. That worked for me.
This light bar puts out an insane amount of light! Installation was fairly easy, takes some time to positioned properly against the windshield to prevent light bleed. Can be installed alone, but having a second set of hands would speed things up.
Install took about 20 minutes, fit perfect, puts a lot of light out and I have a 5% window AS1 strip so I was not sure what all to expect.