« Back to product
Amanda P.
Does the Quadratec RES-Q Teton Series Winch work with this front bumper?
Yes, it does.
Julian F.
Does this combo come with the rear bumper license plate mounting bracket for the 2025 JL Wrangler?
Yes, the Quadratec QRC Rear Bumper (included in the front and rear combo) comes with a dedicated license plate mounting bracket for the Jeep Wrangler JL.
Brian S.
What is the largest tire that the rear bumper will allow?
The Quadratec QRC Rear Bumper is specifically designed to provide extra clearance for larger spare tires compared to the factory bumper.
Wrangler JL (4-Door & 2-Door): The rear bumper accommodates most tires up to 35 inches tall when mounted in the original factory position.
Gladiator JT: Because the Gladiator's spare is stored underneath the bed, the rear bumper does not restrict the spare tire size in the same way. However, it is designed with high-clearance corners to ensure that even with larger 35-inch to 37-inch ground-contact tires, you maintain excellent departure angles.
Wrangler JL (4-Door & 2-Door): The rear bumper accommodates most tires up to 35 inches tall when mounted in the original factory position.
Gladiator JT: Because the Gladiator's spare is stored underneath the bed, the rear bumper does not restrict the spare tire size in the same way. However, it is designed with high-clearance corners to ensure that even with larger 35-inch to 37-inch ground-contact tires, you maintain excellent departure angles.
Michael F.
what is the winch plate rating? does it work on Mojave with forward camera?
The integrated winch plate on the QRC bumper is officially rated for winches up to 12,000 lbs. While it handles up to 12,000 lbs, it is not compatible with the Warn Zeon Platinum series due to its larger chassis. Some users also report tight clearance with the Badlands 12,000 lb winch against the Jeep's grille.
This bumper will fit the Gladiator Mojave, but it requires minor trimming (approximately 1 inch) of the factory Mojave-specific skid plate to align correctly with the bumper’s mounting points.
Forward Camera (Trail Cam): Because the QRC features a large center grille guard hoop, your camera's view will be slightly obstructed by the steel tubing. The tube will be visible in the bottom half of the screen.
This bumper will fit the Gladiator Mojave, but it requires minor trimming (approximately 1 inch) of the factory Mojave-specific skid plate to align correctly with the bumper’s mounting points.
Forward Camera (Trail Cam): Because the QRC features a large center grille guard hoop, your camera's view will be slightly obstructed by the steel tubing. The tube will be visible in the bottom half of the screen.
Nathan K.
Does the front bumper have slots for parking assist sensors?
No, it does not.
Jason T.
What is the Weight of the Front bumper?
107 lbs for the full width option and 97 lbs for the stubby option.
Michael B.
Will I have to replace or relocate my spare tire mount on my 2021 wrangler JL
In most cases, no, but it would depend on your tire size.
NINO S.
Is there a place to mount the front license plate? I am in Virginia and they are handing tickets out often for no front tag
thank you
Something like: https://www.quadratec.com/products/hawse-fairlead-license-plate-mounting-bracket-11238.07 will allow you to mount a license plate to the front of the bumper.
Daniel S.
Does the rear bumper spare tire block the backup camera?
No, it will not block the backup camera.