Skip to main content
Home » Jeep Winches, Recovery & Safety Gear » Winches » Overland Vehicle Systems S.C.A.R. Winch
« Back to product
What else will I need to install this on my 2020 Jeep Gladiator? It has the stock steel front bumper.
To mount the Overland Vehicle Systems S.C.A.R. Winch onto your 2020 Gladiator with the stock steel front bumper, you will need a winch mounting plate specifically engineered for the factory steel bumper or plastic bumper.

Please call customer service at 1-800-745-2348 for assistance finding the perfect fitment for your specific vehicle.
Will this fit the Quadratec QRC Front Winch Ready Bumper Full Width?
Yes, it does.
Does it come with cables to run to the battery?
Yes, the comes complete with heavy-duty battery cables and a wiring harness required for a standard installation directly to your vehicle's power source.
Does it fit the Carnivore full frame front bumper?
Yes, it does.
Will this fit Spartan High-Clearance Front Bumper with Overrider?
Yes. The Rugged Ridge Spartan High-Clearance Front Bumper features a recessed, integrated winch mount utilizing a standard 10 inches by 4.5 inches footprint, which directly accommodates the Overland Vehicle Systems S.C.A.R. Winch.
Will this bolt onto the Rock Hard 4X4 RH-90205 Winch Mounting Plate for 18-26 Jeep Wrangler JL & Gladiator JT with Factory Plastic Bumper.
Yes. The Overland Vehicle Systems S.C.A.R. Winch uses a standard 10 inches by 4.5 inches mounting bolt pattern, and the Rock Hard 4X4 RH-90205 Winch Mounting Plate is engineered with pre-cut standard winch footprints to accept it directly.
I worded my previous question wrong, I asked if it came with a "relocation" bracket and meant does it come with a "placement" bracket/mount for the solenoid, so the solenoid can be mounted left, right, or centered.
Yes. The included bracket functions as a relocation or offset bracket that allows you to shift and mount the solenoid box off-center (such as to the left or right over the motor) to clear tight grille or bumper spaces, rather than being locked strictly to the default center-over-drum position.
Does it come with the solenoid relocation bracket?
The Overland Vehicle Systems (OVS) S.C.A.R. Winch does not come with a dedicated solenoid relocation bracket or an extension wiring kit in the box.
will this fit the smitybilt SRC Gen3 front bumper
Yes, it will.
Will this fit on the Rugged Ridge 11549.45 Venator Front Bumper?
Yes, it will.