« Back to product
JEFFREY G.
Is this bumper compatible with the Mojave Gladiator models?
Yes, the DV8 Offroad FBJL-13 OE Plus Front Bumper is compatible with Jeep Gladiator JT models, including the Mojave.
Thomas F.
I would like to run a mid height bar. Do you offer a compatible product? Are the bar mount holes on top of the bumper by where the recovery hooks go in the same position as the OEM bumper?
Yes, DV8 offers the 13-Inch Elite Series LED Single Row Light Bar which mounts directly above the included bull bar using their dedicated light bar mount. The factory-style recovery hook bolt locations on top of the bumper match the OEM bumper layout to securely accept your factory tow hooks.
Thomas F.
Is this available or compatible with a mid height bull bar?
DV8 Offroad FBJL-13 OE Plus Front Bumper for 18-25 Jeep Wrangler JL & Gladiator JT - Is this available or compatible with a mid height bull bar?
Yes, the FBJL-13 bumper includes a steel mid-height bull bar as part of its standard design.
Juan G.
will this fit a 2022 gladiator Mojave?
Will it take factory fog lights?
Will it fit factory Mojave skit plate - need to protect fox bypass?
Yes, the DV8 Offroad FBJL-13 OE Plus Front Bumper fits the 2022 Gladiator Mojave, but there are important fitment notes regarding your factory setup:
Vehicle Fitment: It bolts directly onto the 2022 Gladiator Mojave frame.
Fog Lights: It accepts standard factory fog lights, though specific bracket styles vary depending on whether your Mojave has plastic or steel factory bumpers.
Mojave Skid Plate: No, it is not compatible with the factory Mojave front skid plate. Because the bumper features a recessed winch mount, it will conflict with the unique high-coverage factory skid plate designed to protect your Fox bypass reservoirs. DV8 recommends using an alternative like their Sway Bar Disconnect Skid Plate instead.
To verify fitment during installation, check that the frame mounts align without binding and ensure there is adequate clearance between the new bumper and your front suspension components.
Vehicle Fitment: It bolts directly onto the 2022 Gladiator Mojave frame.
Fog Lights: It accepts standard factory fog lights, though specific bracket styles vary depending on whether your Mojave has plastic or steel factory bumpers.
Mojave Skid Plate: No, it is not compatible with the factory Mojave front skid plate. Because the bumper features a recessed winch mount, it will conflict with the unique high-coverage factory skid plate designed to protect your Fox bypass reservoirs. DV8 recommends using an alternative like their Sway Bar Disconnect Skid Plate instead.
To verify fitment during installation, check that the frame mounts align without binding and ensure there is adequate clearance between the new bumper and your front suspension components.
Kathy N.
Will you need to have fog light wire extensions
Yes, depending on your factory bumper configuration, you may need fog light wire extensions when installing the FBJL-13.
If your Gladiator originally came with a plastic bumper, the factory wiring harness is typically long enough to reach the new bumper locations. However, if your Jeep came with a factory steel bumper, the wiring harness is routed differently and is often too short, requiring a plug-and-play fog light extension harness to reach the new lights.
If your Gladiator originally came with a plastic bumper, the factory wiring harness is typically long enough to reach the new bumper locations. However, if your Jeep came with a factory steel bumper, the wiring harness is routed differently and is often too short, requiring a plug-and-play fog light extension harness to reach the new lights.
Kathy N.
Can you use cube lights on the bull bar
Yes, you can mount cube lights on the bull bar.
DAVID D.
If I do not yet use it with a winch does it have a cover for where the opening is on the bumper
Yes, the DV8 Offroad FBJL-13 OE Plus Front Bumper includes a removable winch plate cover. This is specifically designed for owners who want the upgraded protection and style of an aftermarket bumper but aren't ready to install a winch immediately. The cover plate provides a "finished" look by hiding the recessed winch mounting area and preventing it from becoming a debris-trap for mud and leaves.
Jeff D.
Will stock fog lights from a rubicon jl work with this?
Yes, the DV8 Offroad FBJL-13 (OE Plus Series Bumper) is designed to fit the factory fog lights from your Jeep Wrangler JL or Gladiator JT. However, there is a small "catch" depending on whether your Rubicon came with the Steel Bumper Group or the Standard Plastic Bumper.
1. If your Rubicon has the Plastic Bumper
The FBJL-13 is a direct bolt-in for the fog lights found in the OEM plastic bumpers. These use a 4-bolt mounting pattern that aligns perfectly with the brackets inside the DV8 bumper. You will simply unscrew them from your stock bumper and move them over using the hardware provided by DV8.
2. If your Rubicon has the Steel Bumper
If your Jeep came with the factory steel winch-ready bumper, your fog lights use a different, 2-bolt mounting bracket.
The Solution: You can still make them work, but you will need a Fog Light Adapter Bracket. This converts the 2-bolt Rubicon Steel LED light to the 4-bolt pattern required by most aftermarket bumpers.
1. If your Rubicon has the Plastic Bumper
The FBJL-13 is a direct bolt-in for the fog lights found in the OEM plastic bumpers. These use a 4-bolt mounting pattern that aligns perfectly with the brackets inside the DV8 bumper. You will simply unscrew them from your stock bumper and move them over using the hardware provided by DV8.
2. If your Rubicon has the Steel Bumper
If your Jeep came with the factory steel winch-ready bumper, your fog lights use a different, 2-bolt mounting bracket.
The Solution: You can still make them work, but you will need a Fog Light Adapter Bracket. This converts the 2-bolt Rubicon Steel LED light to the 4-bolt pattern required by most aftermarket bumpers.
Mike C.
What skid plate do I need with this?
The bumper is not compatible with the factory front skid plate. As a replacement, we recommend DV8’s Sway Bar Disconnect Skid Plate. DV8 Offroad SPJL-02 Sway Bar Disconnect Skid Plate for 18-25 Jeep Wrangler JL & Gladiator JT