Chat with us, powered by LiveChat | Quadratec Skip to main content
Home » Jeep Steering & Brakes » Steering Linkage » Drag Links » Steer Smarts YETI Series Extreme Duty Draglink Assembly
« Back to product
Will any mounting option work for stock 2017 wrangler 2 door JK?
There are 3 mounting options you'll select from the drop-down menu before adding to your cart. Bottom mount w/stock set up, top mount w/stock knuckles drilled, or top mount w/stck knuckles not drilled.
I plan on a lift very soon but will this fit with stock suspension for now?
Yes, it will.
I am currently running the bottom mount setup on my JKU. My local shop is telling me there is play in my drag link. Can I just replace the outer (steering knuckle side) with the top mount (no drill) and the inner with the normal replacement? Or do I need to use the bottom mount replacement for the outer?
you would just need to order the different end links, as the center section is still the same.  You would need PN 77054002 for the top mount axle side joint, and a PN 77055002 for the pitman arm side.
Will this part still work for my Jeep if I choose to upgrade from a 2" to a 4" lift?
Yes, it will. Thanks for your inquiry.
Will this fit with stock rims
If you have 17" or 18" wheels, it will. If you have 16", 4.5" of backspace or less may be needed for clearance. Thanks for your inquiry.
does this go from the Pittman to the spindel?
From the Pitman arm to the Passenger side steering knuckle. Thanks for your inquiry.
Dear Sir, can you explain the difference between these three select - Top mount with stock knuckes Non Drilled OR Drillet and Bottom Mount with Stock Setup ? And with 3" (lift) raiser is it good ? Sorry for ma langue, I'm French. Cédric.
You would just need to order the different end links, as the center section is still the same.  You would need PN 77054002 for the top mount axle side joint, and a PN 77055002 for the pitman arm side.  The Top Mount with Stock Knuckes Non Drilled (78063001) is for high steer applications. (Dana 60 upgrade) The Top Mount with Stock Knuckes Drilled (78063001) is for JKs with Reid Knuckles installed or had the knuckle drilled out with the split bushing installed that accepts a standard stud. The Bottom Mount with Stock Setup (78064001) is for stock LHD applications.