« Back to product
Joe M.
Will the 2" - 4" Apline front and rear adjustable control arms work with this leveling kit?
The TeraFlex 1415610 Alpine 8pc Adjustable Flexarm Kit is not recommended for the Teraflex 1155200 Leveling Kit for 07-18 Jeep Wrangler JK.
Lift Height Mismatch: The leveling kit provides 1.5" of front lift and 1.0" of rear lift, while the Alpine control arms are specifically engineered and indexed for 2" to 4" lifts.
Adjustment Limits: Because the lift is below the 2" minimum threshold, you will not have enough down-adjustment on the arms to properly set factory alignment angles, leading to potential binding or incorrect geometry.
Lift Height Mismatch: The leveling kit provides 1.5" of front lift and 1.0" of rear lift, while the Alpine control arms are specifically engineered and indexed for 2" to 4" lifts.
Adjustment Limits: Because the lift is below the 2" minimum threshold, you will not have enough down-adjustment on the arms to properly set factory alignment angles, leading to potential binding or incorrect geometry.
Stephen C.
Can you use the factory shocks with this kit??
Yes, you can use the factory shocks with the Teraflex 1155200 Leveling Kit for 07-18 Jeep Wrangler JK.
The kit includes shock extension brackets that allow you to retain your factory shocks without overextending them during articulation.
The kit includes shock extension brackets that allow you to retain your factory shocks without overextending them during articulation.
Chad S.
Do you need wheel spacers for factory size tires?
No, you do not need wheel spacers for factory-size tires when installing the Teraflex 1155200 Leveling Kit for 07-18 Jeep Wrangler JK.
Allan O.
I have the Quadratec Morphic Wheels with 5.2in backspace on a 2016 JK. Will this fit?
Yes, it will.
Eugene L.
Do you have shock extensions that I could get to go with this kit?
Yes, shock extensions are available to use with the Teraflex 1155200 Leveling Kit for 07-18 Jeep Wrangler JK, allowing you to retain your factory shocks while accommodating the added lift height.
For the Teraflex 1155200 Leveling Kit for 07-18 Jeep Wrangler JK, Teraflex offers separate front and rear shock extension kits designed specifically to retain your factory shocks:
Front Upper Shocks: Teraflex 1553800 Front Upper Shock Extension Kit
Rear Upper Shocks: Teraflex 1554800 Rear Upper Shock Extension Kit
For the Teraflex 1155200 Leveling Kit for 07-18 Jeep Wrangler JK, Teraflex offers separate front and rear shock extension kits designed specifically to retain your factory shocks:
Front Upper Shocks: Teraflex 1553800 Front Upper Shock Extension Kit
Rear Upper Shocks: Teraflex 1554800 Rear Upper Shock Extension Kit
Bill S.
Will spring compressors be necessary for install?
While you likely won't need traditional spring compressors for this Teraflex leveling kit, you will need to carefully control the axle's movement using a jack and potentially loosen control arms to gain enough clearance to work with the springs. Always follow the manufacturer's instructions for the safest and most effective installation.
Tim T.
If I use the Teraflex 1155200 Leveling Kit and want to get a new set of shocks what shocks could I pair with the kit? Thanks.
Any shock of your choosing with the appropriate total lift height measurements for your vehicle would work.
Dave S.
Will this work with Fox shocks for 1.5”-3.5” lift?
Yes, that would be the new shock length you need.
John N.
2007 JK Wrangler w/ stock 16” steelies.
Will be running a 33x12.5 on a 15” wheel w/4” BS. Will this leveling kit allow me to run that set up without rubbing?
Likely not. 15" wheels will not clear brake calipers on JK models. Thanks for your inquiry.
Ted B.
Will this kit work without whee spacers with factory wheels?
No. Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters (# 1055000) for stock wheels. Thanks for your inquiry.