Chat with us, powered by LiveChat | Quadratec Skip to main content
Home » Jeep Lift Kits & Suspension » Shocks » Monotube Shocks » Bilstein Heavy Duty Gas Shock Set
« Back to product
can you get black boots for these shocks?
These come with the boots as shown, however, if you'd like to remove them you could swap them out for: https://www.quadratec.com/products/16021_XX_PG.htm
Am I correct in assuming that these shocks will work with a JK on a 2” spacer lift without the use of any shock extensions?
Yes. Stock, with a leveling kit or up to two inch spacers are all compatible for use with these highly versatile and comfortable shocks that perform great both on road and on uncertain terrain. No shock extensions are needed. Thanks for your inquiry.
I'm looking for a set of shocks front and rear for 2099 Jeep wrangler x. I like the Bilstein but was wondering if they come in different colors then the yellow and blue Brian
Not this model of shock. For 2-3.5" of lift they offer a silver color shock body. They are not compatible with stock model Jeeps though. Thanks for your inquiry.
My question concerns the Bilstein Heavy Duty Gas Shock Set for 07-18 Jeep Wrangler JK & Wrangler Unlimited JK with 0-2" Lift. Is there anything in addition to the shocks themselves that I MUST buy in order to get these installed and functioning correctly?
No. They can be used with a stock Jeep and require no additional hardware for mounting. They are perfect also for use with leveling kits and spacer lifts not exceeding 2". They provide a great ride, both on road and off. Thanks for your inquiry.
I purchased the AEV 2" spacer lift with the Bilstein Heavy duty gas shocks. The shocks say 0-2.5" lift, should I use the provided shock extensions.
No. These shocks are compatible with JK models equipped with a 2" spacer lift. No shock extensions will be needed. Thanks for your inquiry.
Bonjour, ces amortisseurs fonctionnent ils avec le kit terraflex 2,5 ?
Non. Ces amortisseurs ne doivent être utilisés qu'avec des ressorts de hauteur de roulement d'origine pour soulever les ressorts sur une hauteur supplémentaire de 2 ". Merci pour votre demande.
Are these shocks the same as the Front 24-141727 and Rear 24-141734 models?
That is the correct matching models used in this kit. Thanks for your inquiry.
Will these work with a 2” front, 1” rear leveling kit? What extra hardware (nuts, bolts, etc.) would I need to order?
Yes, these would be a good application for leveling kits. Extra hardware should not be needed. Thanks for your inquiry.
will these work with a 1.5" leveling lift ?
Yes, they will. Thanks for your inquiry.
Will these work on a 2.5" lift?
No, they will not.