« Back to product
Giuliano C.
Will this work fine with Fox Racing Shox 2.0 Performance Series IFP Shock (1.5" - 3.5" lift height range)?
Yes, that setup will work great! The Teraflex 1351502 1.5" Performance Leveling Kit provides a modest 1.5-inch lift, and pairing it with Fox Racing Shox 2.0 Performance Series IFP Shocks rated for a 1.5"–3.5" lift height range is an ideal match. Those shocks are designed to accommodate that exact lift window without over-extending or bottoming out, while drastically improving your JK's ride quality both on the highway and out on the trail.
Garland P.
I am considering this mod but I carry 2 e-bikes on the rear if the jeep a lot. Will the kit work for hauling or do I need a kit that will retain the original positive stance of my jeep.
Yes, that leveling kit will cause a reverse rake because carrying two e-bikes adds heavy rear tongue weight to your 2-door JK.
Instead, look into a small rear load-leveling spacer kit or a full suspension kit with heavier rear coils to support the extra gear without sagging.
Instead, look into a small rear load-leveling spacer kit or a full suspension kit with heavier rear coils to support the extra gear without sagging.
CHRISTOPHER B.
I noticed you said it's recommended to replace the shocks as well. What would the recommended shock lengths be to install with this kit?
Teraflex states it will work with original or stock-length aftermarket shock absorbers. They recommend Falcon Performance Shocks or TeraFlex 9550 VSS Twin-Tube Shocks for best results they have tested. Thanks for your inquiry.
Andrew K.
Will this kit work with a Rubicon?
Yes, it will. Thanks for your inquiry.
Guillermo R.
Can I use my oem shocks with this performance leveling kit?
Longer shocks are recommended as this would put your Jeep at the top limit of the stock shocks. You would not have any room for extension.