« Back to product
Shawn S.
will this work for the 2026 wrangler doors?
Yes, it will.
Craig S.
I have a 2019 Wrangler JL Sport, with large fixed mirrors. Will this cause the doors to hang to far out? Can the doors be hung backwards on this bracket, paint side out?
The doors cannot be hung backwards (paint side out) on this hanger. The mounting slots and hinge pins are specifically engineered to engage with the factory door hinges in their natural orientation (interior facing the wall) to safely support the weight and prevent the door panels or mirrors from resting against and scratching your garage wall. This may cause the doors to not mount neatly against the wall.
Charles K.
How much weight can these hangers hold?
The weight of the doors themselves. They are not designed to support anything other than Jeep doors or doors with added weight accessories to them. Thanks for your inquiry.
Mark N.
All your pictures have these on unfinished walls and it looks like the mirrors rest between the studs. Will these work with finished walls where those gaps don't exist?
Yes, you can use it on drywall. The only difference is the doors may not fit flush against the wall, it will stick out further. The mirrors would need to be folded all the way in. The hanger is designed with a bios so that gravity always tries to make the door tilt toward the wall. There is no worry about the doors swinging out into the isle, they will just stick out more. Thanks for your inquiry.
Jason C.
Is this for one hanger that Carries 2 doors or 2 hangers that will accommodate 4 doors. I have a (4 door) JT and want to make sure I order correctly.
This is one carrier to handle a pair of doors. two sets would be required to handle all 4 doors. Thanks for your inquiry.
Robert F.
What's the width between the holes that go into the studs on each side? Normal construction is 16" on center, so I wouldn't want to buy them if they were different than that and required anchors.
16" It is designed for normal stud alignment. Thanks for your inquiry.