Reviews for Crown Automotive 5016709AD Multi-Function Switch for 01-06 Jeep Wrangler TJ with Fog Lamps

Perfect match

Direct replacement

Quality parts

Perfect fit. Work as expected.

Anyone with a TJ gets to replace this sooner or later. Easy to install, fixed the issue of the fog lamps turning themselves in. Got tired of driving around with the fuse pulled. Will try to repair the old one based on YouTube guidance so I'll have a spare. Have owned my LJ since new, and this is the second time I've had to replace MF switch for this issue.

I had trouble finding one with Fog Lamps before I found your website.

Item fit perfectly and functions as it should. I no longer have Fog Lights that turn on and off all by themselves while driving. Make sure you remove the relay from the old one you're replacing and install it on this new part, as it doesn't come with a new relay attached. Other than that, two phillips head screws need to be removed from the bottom schroud which will then allow the removal of the upper and lower plastic schroud to gain access to the torx screws holding this onto the steering wheel column.

Easy install good product

Direct fit for my 2005 Wrangler X. A quick youtube search brings up an easy to follow installation video.

Easy install (like 2 phillip, and 2 Torx screws), exact fit replacement for stock '03 Rubicon. Took like 45 minutes. Fixed my Fog Lights problem. The 2 electrical wiring harness connectors are perfect fit. It also connects to the stock (Right half windshield wiper) side. A couple months in, all controls are working. NOTE: If you want to solve your Fog Light problem, without killing your battery (before buying this part), then simply pull the FUSE for the fog lights on your Jeep, and you can drive it around however long you want, before buying this part.