« Back to product
Stephan N.
I have a stock 92 jeep wrangler, and I would like to pair these tires, MT Baja ATZP3 size 31x10.50R15 with the Quadratec Rubicon Xtreme wheel, size 15x8. Will that configuration fit without any issues? Thanks.
We would suggest approximately 2" of lift to clear 31" trouble free. The wheel will have the correct backspace for avoiding any wheel turn rubbing or contact. Thanks for your inquiry.
Kevin W.
I have an 05 TJ with a 2.5” Rough Country suspension lift. I have 15” Pro Comp alloy wheels, what’s the largest size I could run with no rubbing? Thanks.
a 2.5" lift on a TJ would be able to accommodate 33 x 11" tires.
Ken M.
Will the 315/75/17 tires fit on stock 2021 JL wheels with a Skyjacker 3.5-4in Dual Rate Coil Suspension System with Black Max Shocks for 18-21 Jeep Wrangler JL Unlimited? Thank you.
Please direct specific fitment questions to our sales/service team at 1-800-745-5337
Harald K.
Hi - I'm buying a 2020 Gladiator Overland and I'm looking for a wheel and tire package that's going to let me drive on the beach without airing down. I bought a great set of Mickey Thompsons from you for my CJ and I'm looking for basically the same thing. I don't see a lot of options for the Gladiator.....why not? Can I maybe just get new rims for my Gladiator that would accommodate the CJ tires I already have, or is the rim size too small?
Try our wheel and tire builder. Click Here
Dale E.
Will there be any rub with 32.60 x12.00 R17 tires on 8.5 inch rims with 5.2 backspace on a 2019 Jeep Wrangler JL 2 door Sport S? I have 1.75 inch wheel spacers, but have no lift installed. Thank you.
The wheel spacers should minimize the chance of rubbing during full turns. A lift kit would still be recommended for that configuration if you plan on off-roading.
Barry C.
I'd like to run the LT305/65R17 size of this tire with the Teraflex 1155200 Leveling Kit(Item No: 16190.1100.07) on the stock wheels of my '17 wrangler sport. Will this configuration have any fitment problems? Will that size of tire fit on the stock rims?
That configuration will work. You might end up with some rubbing at full turn which can easily be solved with some wheel spacers if needed. Thanks for your question