Reviews for Quadratec LED Tail Light Kit for 91-95 Jeep Wrangler YJ

First of all, a great product, especially as a kit which included the new flasher to enable proper function of the LEDs. I was disappointed with the new chrome screws as the original screws are black. I appreciate the full-color instruction booklet, however, I have a few recommendations as my installation process was not as easy as others have said.

On Figure 6, I had to remove the passenger rear plastic under body piece in the wheel well to reach the plug. It plugged in nicely, but just took additional time that this step glossed over. I would have appreciated a picture of the inside of the new LED tail lights as they are much different than the old stock lights, primarily on the driver's side with the license plate light. I had to remove the clear plastic shelf those LEDs are adhered to for access to the bolts that attach the tail light to the body. The mass of wires inside are very short and tight, limiting how much you can move the red tail light lens for access. Again, your new tail light installation instructions are vague and did not mention this.

Finally, the full color photos and instructions for the flasher installation were excellent.

Overall, four stars as I have only had the new tail lights two weeks, and while the installation was not difficult, it was tedious.

LED taillights are great! Just an FYI the tail lights must be bolted to the body to create a ground before they will work. I Usually like to test it before buttoning everything back up. I spent an hour looking thinking I pulled a wire loose on the passenger side because the light wasn't working. Once I bolted the tail light to the body it was good to go.

i like this led light kit. but I don't like is FEDEX shipping takes a two weeks .