« Back to product
Austin M.
Will this work in the 2016 75th anniversary if it has an “off-centered” hole?
Yes, the Mopar 82214786AB Winch Mounting Kit is specifically designed to work with the factory steel front bumper found on the 2013-2018 Jeep Wrangler JK 10th Anniversary Rubicon, Rubicon X, Hard Rock, 75th Anniversary, and Recon edition models.
The product description explicitly states this compatibility. Furthermore, it mentions that the mounting plate bolts directly to the vehicle's frame and is designed to accommodate most winches with an off-set configuration, such as the Warn 9.5xp (which requires a separate Mopar fairlead adapter).
The product description explicitly states this compatibility. Furthermore, it mentions that the mounting plate bolts directly to the vehicle's frame and is designed to accommodate most winches with an off-set configuration, such as the Warn 9.5xp (which requires a separate Mopar fairlead adapter).
Howard W.
I have a 2014 JKU with what I believe is the 10th anniversary bumper. Do I need this set to fit a typical Warn winch? What else do I need to buy (apart from the winch) to fit the winch? How about those parts that fit outside the bumper in the front?
This will fit a WARN winch. No other parts will be necessary. The fairlead (the part on the outside of the bumper) will come with the winch.
Chad B.
Will this fit on a 16 Hard Rock JKU with a Badlands Apex 12000?
Yes, it will.
David A.
Will this work with 12 k smittybilt winch
The Mopar 82214786AB Winch Mounting Kit for the 2013-2018 Jeep Wrangler JK with the Rubicon 10th Anniversary Steel Front Bumper is specifically designed to accommodate a variety of winches. It should work with the Smittybilt 12k winch. However, there are a few things to consider.
Mounting Dimensions: The Mopar winch mounting kit can support most standard winches, and the Smittybilt 12k has a typical bolt pattern (10" x 4.5") that aligns with the standard winch mount design used by Mopar. The mounting plate is designed to handle the weight and size of larger winches.
Weight Capacity: The Mopar mounting kit is robust enough to handle the weight and pulling power of a 12,000 lb winch, but ensure the front bumper and frame of your Jeep are also rated to handle this amount of load safely.
Clearance: Double-check the space available around the bumper and winch mount area to ensure the Smittybilt 12k winch fits without interference. Some larger winches may require slight modifications for optimal fit, though in most cases, it should be a straightforward installation.
Pat W.
Does this work with a Warn M8000 winch?
Thanks
Yes, it will fit. Thanks for your inquiry.
Shawn U.
Will this work for a 2014 JKU with a 2018 JL steel bumper and Stealth winch? I got the JL plate (101255) to work with the bumper but that wouldn't mount (JKU missing skid brackets/frame). Bumper appears stock JL/center holes for fairlane
This winch mount is not used with any JL bumper options. Thanks for your inquiry.
Craig F.
Will this work with a Warn EVO VR10S?
Yes, it will.
Roger B.
Hi. I purchased this kit several years ago, but never had the winch and never installed it. I cannot find the directions for the install and you guys usually post them with most products. Do you by chance have the directions for this and does it include the parts list?
Instructions are available and now posted.
Matt B.
Will this work for your Quadratec stealth winch?
Yes our stealth winch will fit the 10th Anniversary Bumper with this mounting system
KC W.
Why is the mounting of the winch off center to the drivers side?
The winch that Jeep uses and sells as Mopar and which they designed accessories around has an offset drum and spool.