« Back to product
Jason M.
Hello. I installed the LED Tail Light Kit (Quadratec Part #: 55213.0116) about 2 months ago. I followed the instructions, including changing out the blinker module. Everything was working until about a week ago. The red lights work for blinkers, breaks and running lights, however the white reverse lights completely stopped working. I have not taken the jeep off-road. Is the LED faulty or is there a fuse? Any guidance you can provide would be appreciated. Thank you
We would recommend checking the voltage to the reverse light. If you are not sure how, we would recommend taking it to a shop to be properly diagnosed and move forward from there. If the issue turns out to be the tail lights, contact [email protected] and we will take care of you.
Greg G.
Will these still work with the incandescent front turn signals?
Yes this will not interfere with the front, or be affected by the front.
William R.
Do you get a separate diver side and passenger side light? One with a license plate light and one with out?
Yes these will be left/right specific when you receive the kit.
Kyle R.
Are these tail lights grounded the same way as original tail lights or is there a ground wire that needs to be attached to the studs or screws? I have an 05 and it will be tough getting behind the evap canister or impossible if the studs are fixed.
Yes, they are grounded the same as factory.
David L.
Are the backup lights on Item (Catalog #: 55213.0116) LED bulbs as well as the brake lights?
Yes, they are