« Back to product
Randy K.
What are the overall dimensions L x H x W and wall thickness?
The overall width is 35-1/2" and the height is roughly 14". The depth is approximately 7". The Brush guard has a 14 degree angle and can be mounted so it is leaning forward (away from the vehicle) or back, toward the vehicle grill. The mounting plates are 3/16" and the 3" tube is 0.083" wall.
Edith M.
Will this fit a 2018 jku wrangler Rubicon recon
Yes, as long as you also have a warrior front bumper already installed.
George H.
Will or can this fit factory OEM 2017 jeep wrangler jk front bumper?
No, this is designed for Warrior Bumpers only.
Jim R.
Instructions do not list the part number 59025. Will this fit any WP front bumper?
Yes, it is a universal design that can fit most of warrior bumpers (sometimes with minor drilling). The #59025 Brush Guard is designed to fit any bumper that can accommodate the 35.5″ total length of the brush guard. 35.5″ is measured from the outside of one mounting plate to the outside of the opposite mounting plate. Also, if the bumper has an area to put a winch, it must be less than 22.5″ wide as the span of the #59025 brush guard from the inside edge of the mount plate to inside edge of the opposite mount plate is 24.5″. We recommend a 1″ gap on either side, away from the winch area span.