Chat with us, powered by LiveChat Reviews for OMIX 17401.21 Black Aluminum Valve Cover for 81-86 Jeep CJ with 4.2L | Quadratec Skip to main content
Home » Jeep Engine & Fuel System » Engine Gaskets & Hardware » Valve Cover Gaskets » OMIX Black Aluminum Valve Cover

Reviews for OMIX 17401.21 Black Aluminum Valve Cover for 81-86 Jeep CJ with 4.2L

< Back to the product
Bob J.
10/16/2022
5

Clean look
Tim R.
4/15/2022
5

Looks
Larry R.
1/4/2022
5

Much better than cheep plastic it came with
Shawn S.
12/13/2021
5

Fit perfectly on my 1982 258, easy install, looks good and no leaks. Ditch the cork gasket and get a black rubber Fel-Pro. Clean the head really well and follow the torque specs and you should be good to go. The thing i was most worried about was tapping the holes on the drivers side, but the bottoming tap cut through the head like butter (it ended up being the easiest part of the whole swap).
William C.
4/8/2020
5

perfect fit, looks great
EDWARD C.
3/31/2018
5

Worked great also looks good had to tap two holes in the head easy install
Mark M.
2/1/2018
3

pretty well built, Paint job was kinda funky, but the real issue is that not all holes lined up perfectly and proved to be a real pain to install
Krispian M.
1/24/2022
2

I recently purchased the OMIX aluminum valve cover for a 1982 CJ5 with 258. It required tapping the 5 holes on the side, which was a relatively simple job. However the cover did not line with the 2 stock holes; 1 front and 1 rear. I used the vehicle fit guide and the cover I ordered was listed as a fit for my vehicle.