Skip to main content
Home » Jeep Wheels » Lug Nuts & Locks » Locking Lug Nuts » Lynx 23 Piece Spline Drive Wheel Lug Nut Kit
« Back to product
Would these work with a 2001 Jeep Cherokee XJ? And if so, do they fit the factory adaptor as well?
No. The Lynx spline kits designed for modern Jeeps use a 14mm x 1.5 thread pitch, whereas your 2001 Cherokee XJ requires a 1/2"-20 thread pitch.

Because the thread pitch is completely different, they will not thread onto your XJ wheel studs, nor will the included spline socket/adapter fit or work with an XJ's thread requirements.
will these work on a 2014 JK Wrangler Unlimited?
Yes, they will. Thanks for your inquiry.
Will these lugs work with the iON 147 wheels? Thanks.
Yes, they will. Thanks for your inquiry.
Just purchased the Icon Alloy Thrust wheels for my 2013 JK. Will these work with that wheel on that model Jeep?
Yes, they will. Thanks for your inquiry.
Will the stock lug wrench of a 2006 LJ fit the key?
Yes, it will. Thanks for your question.
Going to ask again as I wasn't clear apparently. Two questions. What is the length of the lug nuts? Are they long enough for the Pro Comp series 31 Stryker wheels?
Each lug is 1 13/32" in length. I thought you meant the socket drive. Spline drive lug nuts are likely a better option if the wheel has narrow lug openings. There are not many wheels a spline drive set are ever incompatible with. Thanks for your questions.
What is the length of these sockets? I think I need 2" for Pro Comp 31 Stryker wheels. Going on 1999 Wrangler TJ
3.5" Long. Thanks for your inquiry.
Can an impact driver be used with these lug nuts?
No, they should not. Standard torque wrenches like in the following link are recommended. https://www.quadratec.com/p/performance-tool/torque-wrench/small. Thanks for your inquiry.
Will these fit the Pro Comp 69 wheels?
Yes, they will.
Will these fit with the cragar soft 8's?(15x8)
Sure will!