Skip to main content
Home » Jeep Lift Kits & Suspension » Sway Bars » End Links » Crown Automotive Front Sway Bar Link

Reviews for Crown Automotive 52087771 Front Sway Bar Link for 97-06 Jeep Wrangler TJ

< Back to the product
John M.
9/29/2022
5

Available
MIKE R.
5/15/2022
5

They are pretty
Guest
12/17/2021
5

Great
Ashley S.
11/17/2020
5

Worked as expected. As and FYI, if you are using or plan on replacing your sway bar bolts with 1/2 inch bolts from the factory metric bolts the bolts will fit tight into these where you'll need to either tap the bolt with a hammer or just just ratchet it in.
David M.
2/9/2018
5

Replaced my originals perfectly
MILES K.
9/26/2017
5

Easy install. Don't forget the star bit on the lower bolt.
Richard C.
11/15/2018
3

Had bushings for larger bolts than my TJ , so I some on my lathe
Eric H.
11/10/2019
2

Looks like a quality product, but the bushings were meant for a smaller bolt. Therefore, this is not a direct factory replacement as it is described.
Todd L.
6/13/2021
1

Part did not fit. It was a mm smaller. Ended up buying it from a local parts dealer. Twice the cost but manufactured way better. Sway link should have had a hole for a hex wrench in the top so the ball joint would not turn during install.