« Back to product
Adrian C.
Hi! Will these work okay with a '98 Cherokee Sport running 1.5" shackles?
The Crown Automotive 52002393 will physically fit your '98 Cherokee Sport with 1.5" shackles. However, it will engage later in the suspension travel due to the lift. Whether this is "okay" depends on your driving style and how much off-roading or heavy loading you do. If you frequently encounter situations where you bottom out the rear suspension, you might want to consider longer snubbers designed for lifted vehicles.
Ernie J.
I have a 3" lift on my cherokee will this work with it or should I go to a lower one
The Crown Automotive 52002393 bump stop is listed as having a 4.1-inch height.
Whether this will "work" with a 3-inch lift depends on a few factors and what you mean by "work":
Intended Function: Bump stops are designed to prevent the suspension from fully compressing and causing damage to other components. With a lift kit, you might need longer bump stops to properly limit up-travel, especially if the lift includes longer springs or different suspension geometry.
Current Bump Stops: What is the length of your current bump stops? If they are significantly shorter than 4.1 inches, then the Crown Automotive 52002393 could potentially work by providing more down-travel protection.
Lift Kit Specifics: The manufacturer of your 3-inch lift kit might recommend specific length bump stops to ensure proper suspension function and prevent issues. It's always best to consult the lift kit instructions.
Tire Size: If you've also installed larger tires with your 3-inch lift, longer bump stops might be necessary to prevent the tires from rubbing against the fender wells during compression.
In summary: A 4.1-inch bump stop could physically fit with a 3-inch lift. However, to determine if it will work correctly for your specific setup and provide the necessary protection, you should:
Measure your current bump stops.
Consult the installation instructions for your 3-inch lift kit for recommended bump stop lengths.
Consider your tire size and potential for rubbing.
Without this information, it's impossible to definitively say if the Crown Automotive 52002393 will be the correct bump stop for your 3-inch lift. It might be too long, limiting your up-travel more than necessary, or it might be the right length to provide adequate protection.
Whether this will "work" with a 3-inch lift depends on a few factors and what you mean by "work":
Intended Function: Bump stops are designed to prevent the suspension from fully compressing and causing damage to other components. With a lift kit, you might need longer bump stops to properly limit up-travel, especially if the lift includes longer springs or different suspension geometry.
Current Bump Stops: What is the length of your current bump stops? If they are significantly shorter than 4.1 inches, then the Crown Automotive 52002393 could potentially work by providing more down-travel protection.
Lift Kit Specifics: The manufacturer of your 3-inch lift kit might recommend specific length bump stops to ensure proper suspension function and prevent issues. It's always best to consult the lift kit instructions.
Tire Size: If you've also installed larger tires with your 3-inch lift, longer bump stops might be necessary to prevent the tires from rubbing against the fender wells during compression.
In summary: A 4.1-inch bump stop could physically fit with a 3-inch lift. However, to determine if it will work correctly for your specific setup and provide the necessary protection, you should:
Measure your current bump stops.
Consult the installation instructions for your 3-inch lift kit for recommended bump stop lengths.
Consider your tire size and potential for rubbing.
Without this information, it's impossible to definitively say if the Crown Automotive 52002393 will be the correct bump stop for your 3-inch lift. It might be too long, limiting your up-travel more than necessary, or it might be the right length to provide adequate protection.
Mickey C.
Will this work with a 5in lift
You would want to pair this with extended brakes lines at the rear, since there is not really a large selection of extended bump stops to use.
Mel H.
What's the difference with this and 52004297? More precisely do I need to have a lift kit for this bump stop?
This is 1.2" longer. They were primarily used on models with performance suspensions or tow packages, used to limit down travel when fully loaded. A base model would bottom out regularly with these installed.
Randy B.
What's the distance center to center on the bolt holes? I need to see whether I can modify this for an 81 Scrambler.
This measures 4-7/8" from center to center on this bump stop.