Skip to main content
Home » Jeep Lifestyle » Holiday » Quadratec 12-Volt LED Christmas Wreath
« Back to product
While looking at the install video I saw the JK had a grill with integrated lights in the grill. Do you have any info on this grill?
The grille shown on the white JK is a custom project and employee created on their own by drilling holes in a stock grille and creatively placing the lighting behind. It was not made with items available for purchase. Thanks for your inquiry. Thanks for your inquiry.
Can you wire this into the JL Aux switches? I have that package on my Jeep and it would seem to be a good use of them. Thanks.
We have not tested the harness modification that would be needed for that type of installation, unfortunately. Thanks for your inquiry.
What is the size of the wreath?
10.25" in diameter. Thanks for your inquiry.
How do you install this Christmas Wreath ?
Use the longer Cable ties to secure the wreath in place. The shorter cable ties and suction cups should be used to secure the power cord when mounting on the exterior of the vehicle. Make sure all wires are properly secured. Keep wires away from moving parts and hot components like exhaust systems. The power cord has a quick disconnect at the end closest to the wreath. This allows you to disconnect the power cord from the wreath in order to route the wire. Thanks for your inquiry.
Can this safely be attached to the rear tailgate tire? Any pics?
It can be mounted in the rear if preferred. The power only needs to reach a 12-v plug in and the cargo area port when equipped should be fine for use. We do not have a picture of that use though, sorry. Thanks for your inquiry.
Will this wreath fit on a 2012 Rubicon?
This is a universal product designed to work on basically any car/truck/SUV on the road today.
Do I have to remove the glove box?
In most installation cases it is easier to remove the glove box for easier access to grommets into the engine bay.
where is the best place to fish a wire through the firewall on the JL, so I can use the 12v port on dash? on the JK there is an rubber grommet that is easily accessible (drivers side of firewall).
I just looked at one of our JLU's. There is an unused firewall grommet just behind the clutch pedal (Or to the left of the brake pedal if you don't have a manual).
I just received the wreath for my 2017 Jeep Wrangler Unlimited and want to know what is the best way to route the power cord through the firewall into the cab. Thanks
There should be a rubber access grommet behind the glove box that enters into the engine compartment.
Is it possible to wire this in to turn on and off with the headlights? Is there an adapter or something?
No unfortunately there is no adapter that will tie into the factory wiring for using the factory dimmer system.