« Back to product
Brian H.
Do these add 1" or 1.5" of lift?
How do I tighten it down to be either 1" or 1.5"?
Assuming the 1 to 1.5" is an approximation can I install 31 inch tires after installing these?
This component kit does not add 1 inch or 1.5 inches of lift; it is designed as standard-height factory replacement hardware and bushings for your leaf springs, meaning vehicle ride height will remain at stock factory spec unless paired with actual lifted leaf springs or shackles.
Tire Fitment: While this service kit refreshes worn bushings and hardware for factory-height YJ Wranglers, YJ Wranglers typically require at least a 2-inch to 2.5-inch suspension lift to comfortably clear 31-inch tires without rubbing against the fenders or sway bars during articulation.
Tire Fitment: While this service kit refreshes worn bushings and hardware for factory-height YJ Wranglers, YJ Wranglers typically require at least a 2-inch to 2.5-inch suspension lift to comfortably clear 31-inch tires without rubbing against the fenders or sway bars during articulation.
William I.
I'm trying to remove a spring lift and put my YJ back to factory height. Will these do that.
The kit is designed to provide 1-1.5 inches of lift overall though the extended shackles and heavier springs. It will be closer to factory ride height if you are replacing 2" or higher lift springs. Thanks for your inquiry.
Edward T.
Will this require new shocks to accommodate the 1-1.5” lift from the shackles?
No, it will not. Thanks for your inquiry.
Bill S.
What are the measurements of these springs? I'm looking for 22.5" from eye to center both ways and 45" length.
The front and rear spring kits will be 22.68" center to center and 45.375" in length. Thank you for your question.
Steve P.
What is u bolt torque
90 ft. lbs / 122 nm