« Back to product
Tim W.
Will these work with your diver down seat covers
Yes, the Rostra 250-1870 Carbon Fiber Seat Heater kit will work underneath Diver Down Neoprene Seat Covers, but keep a few installation factors in mind:
Heat Transfer: Neoprene naturally resists extreme temperatures, so it will take slightly longer for the heat to penetrate through the covers compared to bare factory fabric or leather, but once warmed up, the material retains heat effectively.
Pad Placement: The carbon fiber heating pads must be adhered directly to the factory seat foam beneath the covers. Ensure the wiring harnesses and edges are tucked cleanly so they do not pinch or rub against the underside of the seat covers.
Heat Transfer: Neoprene naturally resists extreme temperatures, so it will take slightly longer for the heat to penetrate through the covers compared to bare factory fabric or leather, but once warmed up, the material retains heat effectively.
Pad Placement: The carbon fiber heating pads must be adhered directly to the factory seat foam beneath the covers. Ensure the wiring harnesses and edges are tucked cleanly so they do not pinch or rub against the underside of the seat covers.
STAN F.
How much heating power on low? on high?
This is 91F and 127F on lo and hi respectively. Thank you
Chase L.
How do we know if the covers are stitched or glued without taking the seats out and apart? Is there a model number we can search?
These are not for use installed in Jeep seats but per Rostra could be used under slip on seat covers. Thanks for your inquiry.
Dan T.
do these seat warmers shut off automatically ?
Yes, they do.