Reviews for Trigger Complete Switching System with Overhead Switch Mount, Underhood Relay Mount, Connector Kits for 07-18 Jeep Wrangler JK

Fantastic instal , easy as pie for people like me that aren’t proficient with wiring , it looks like a pro did it and it works flawlessly.

Absolutely love the Trigger system. This item is simple to install and you do not have to run wires everywhere, well worth the purchase. Customer service was great when I needed to talk with them about installation (very simple).

Ordered the Trigger complete switching system, with A-Pillar relay mount & connector kit. For a 2012 Wrangler with one battery.
The kit provide everything needed, EXCEPT a fused wire tap to plug into the fuse box, purchased one for under $8.00 at NAPA.
Everything installed without major problems, instructions could use a bit more detailing. The only problem was installing the two batteries in the remote, as you must set a certain switch patter while installing them and due to the small size of the remote it is a bit trying to install the batteries without turning off the switches that are required to be on during power up. Every thing works as advertised, very good unit.

Very easy to install fits next to the battery perfect you will need a fuse tap if you would like it to only when the key is on. Had to buy new batteries because the one that came with it were dead. The cell app will let you name the different switches and has a feature to make them dim and/or flash

this was a easy installation but this unit does turn my off-road lights on by itself. i had to add a toggle switch in the power connection to eliminate possible on road issues or melting blackout covers.

I also have problems with this unit. Overhead light bar will turn on at random times, and this is the second unit I have installed with the same issue. This is a problem especially in day light hours when I have no idea the light bar is on. For now disconnected light bars until I can install a wired system.