Question 1

Laddie R.

11/25/2023

how do you mount this light to a stock jl 2021 rubicon bumper, I dont see a mounting bracket for sale like you have for the JK

Answer

It would require drilling for universal style brackets which we have not specifically tested on a Rubicon bumper. We do not have JL specific light bar mounts as of yet. Sorry for any inconvenience.

Question 2

Dennis Z.

12/20/2022

will this fit the JL unlimited on the carnivore override bar notice there is no installation instructions for the JL

Answer

This light bar should have no trouble fitting the Carnivore over rider. This light bar just does not have a JL specific plug and play wiring harness. Thanks for your inquiry.

Question 3

Jeremy G.

8/26/2022

Will this fit the top bar mounts of the QRC front bumper?

Answer

No. The light mounts on the QRC bumper are designed to accept a 10" light bar or single auxiliary lights. Thanks for your inquiry.

Question 4

Andrew B.

8/14/2021

Is there a bracket you suggest for this to mount to a 2" round tube?

Answer

Quantity 2 of the following mount should allow for the brackets that come with the light bar to attach.Rugged Ridge Tubular Light Mounts Thanks for your inquiry.

Question 5

Peter R.

8/5/2021

Interested in purchasing a Quadratec J3 LED 17 inch light bar. I have a 2009 jeep jk. Do I need to also order this with a wiring harness?

Answer

It is strongly suggested to use our tested and confirmed wiring harness for proper fit and operation. Thanks for your inquiry.

Question 6

Tony P.

9/6/2020

What are the dimensions from hole to hole on the mounting brackets

Answer

The mounting feet have two holes on each side which have a distance of 19" and 19 3/4" - either can be used for mounting.

Question 7

Richard W.

9/11/2019

Is the mount spacing adjustable or fix. And what are the mount hole to hole measurements.

Answer

The mounting feet are fixed. In their normal, fixed mount there are two holes on each side which have a distance of 19" and 19 3/4" - either can be used for mounting. The mounting feet can be reversed, though we do not have that measurement available at this time.