Chat with us, powered by LiveChat | Quadratec Skip to main content
Home » Jeep Wheels » Alloy Wheels » Quadratec Hardrock Wheel
« Back to product
I am putting these on a '21 Gladiator Mojave. The tires I want to put on them are 35" (34.4 tall x 12.7) BFGoodrich All Terrain T/A KO3 LT315 /70 R17 128S F2 RWL ~ Will i need spacers or a lift?
To run a 35-inch tire on your Jeep Gladiator Mojave with a 17x8.5 wheel, you'll generally want a backspace in the range of 4.5 to 5.0 inches. This typically corresponds to an offset of 0mm to +12mm. You will likely still need a wheel spacer to run these without rubbing.
Do these allow for use with the Wrangler JL/U backup camera protector?
Yes, the work with the JL/JLU back up cameras.
I will have a 25 Gladiator JT with the Max Tow package. Stock suspension. What is the largest/recommended tire this wheel can accommodate for my setup with no rub?
Without a lift kit we'd recommend no larger than a 35" tire.
I have a 2016 JKU Rubicon with 2.5" JKS Venture lift. I'm currently using the Synergy 1.75" wheel spacers with stock Hardrock Rims and BFG 315/70R17. Will these Quadratec Hardrock Rims allow the same tires without spacers and no rubbing?
For a JKS Venture Lift, JKS recommends a 4.5" back spacing. The Quadratec Hardrocks are only 5.2" - The hardrocks would still require the use of a spacer to prevent rubbing.
i have a 2021wrangler jl with a zone 3 inch lift. my factory wheels had to have spacers in order to clear the sway bar links. will these wheels clearv the sway bar links with no wheel spacers.
No. Zone off-road advises 4.5" of backspacing or less it appears on their 3" lift kit. Sorry for the inconvenience.
I have a 2005 TJ with stock suspension and 1-1/4 spacers. Will this wheel work on my my jeep? what size tires would you recommend for AT type?
Wheel adapters that allow use of a 5x5 bolt pattern wheel from JK would need to be used. Wheel spacers only change offset without altering the Jeep's bolt pattern for wheel mounting. 30" outer diameter would be suggested for s stock TJ model. Thanks for your inquiry.
I have a 2021 JLU Sport. I am going to put a 2.5” lift on it and put 305/70R17 tires on these wheels. Are there any concerns with this plan? Thank you.
That will be a great fit and look for your model, and add off-road capability if needed. Should be just right. Thanks for your inquiry.
I have a 2019 JL Wrangler Sport. I'm lifting it with a JL Rubicon factory lift kit. I plan on mounting P285/70R17 tires on the wheels. Will the backspacing on this wheel work - meaning prevent tires from rubbing on frame/fender, etc?
Yes, that will allow the turning radius clearance needed with the larger tires. Thanks for your inquiry.
Do the factory tire pressure monitors work on the Quadratec Hardrock Wheels. Do the factory lug nuts work on these wheels.
Yes to both. It will accept factory TPMS sensors and your factory equipped lug nuts. Thanks for your inquiry.
I have a 2013 JK Rubicon. If I am using 265/70/17 tires (Duratracs) with these wheels, will they stick out past the fender falres?
A one inch wider stance than the stock Rubicon, so you will have a slight tire tread exposure of approximately .8" Thanks for your inquiry.