Reviews for Rugged Ridge 12107.10 Wall Mount Door Holders for 76-20 Jeep Wrangler JL, JK, TJ, YJ & CJ
awesome product! easy to install
Sweet design. Works perfectly and keeps the doors closed and out of the way.
Not too impressed for the price.... The bracket seems to be high quality. I wanted this because it come with latches so the door don't swing... Honestly the latches seem like an after thought. The Allen key doesn't fit the latch bolts and they are flimsy. The instructions strongly recommend going into a wooden stud with 5/16 lag bolts but don't include them because they claim they don't know what you will actually bolt it to. Wtf? The tj hinge side is way too small. Ended up flipping to the jk hinge because I shouldn't have to struggle to take the door out of the bracket more then the jeep. Overall happy with the end result but feel like I overpaid for the quality and amount of parts in the kit.
This product is made of high quality material. I chose this product over other similar products because 1) the doors hang with the mirror side of door hanging away from wall and 2) they come with door latch hardware keeping door securely in place. For me, the kit not including lag bolts was not an issue as my mounting conditions required longer bolts than what would have normally been included. Only reason this gets 4 stars is because one of the striker bolts was defective. Should probably add the star back because of the quick customer service in replacing the striker bar.
Great product but if you have a JL, plan a trip to the hardware store first. Besides the wall mount hardware, Alex C's review helped me tremendously (Thanks Alex!) only I shimmed the hinges with three 5/16th washers on each side of the hinge mounts. That gave me about an 1/8th inch clearance between the door limiters. That also required a 2 1/2 inch 5/16th hex bolt, lock washer and nut. The factory bolt is too short to use. Took about an hour to install but I have 16" centers and OSB paneling in the garage. Would have been five stars if someone at Rugged Ridge would have thought about the JL's limiters.
Well built with great materials. They took 3 hours to install two for a JLU doors.
Quality material. Beware, NO mounting bolts for the wall. Mine came with one unmachined #7 Striker Bar. Submitted ticket with manufacturer, now we'll see how good their customer service is or if I'll have to send it back to Quadratec.
Worked fine without shims for the new JL front doors, haven't mounted the tears yet.
Took me 3 hours to install. Garage is built 24 inches on center, and simply installed 2x4s to span the gap for the door latches. Be sure to get lag bolts to mount the hangers, AND PRE-DRILL HOLES! Brackets are (overkill) strong enough to hold the doors. (4mm is between 8 and 9 gauge, by the way, thicker than the frame of a john deer riding lawnmower)
These are very well constructed , and easy to install. knocking one star off because in order to get these to work with the JL doors, I had to install 1/2" spacers to prevent the door stops from hitting each other when booth doors are installed on the rack.