« Back to product
Joshua M.
Will this work for a JT as well? I own a jlru and a jt. I would also like to know if I could use this to remove my RTT.
No, the Lange Originals Power Hoist-a-Top designed for the Wrangler JL 4-Door (such as part #014-910) is not directly interchangeable with a Gladiator JT hardtop. The JT hardtop has different rear cab dimensions, window lines, and weight distribution compared to a JL, meaning you would need a specific JT-compatible unit (or an official Lange conversion/upgrade kit) to safely lift and balance a Gladiator hardtop.
Roof Top Tent (RTT) Removal: No, you cannot use this system to remove a roof top tent. The Hoist-a-Top is engineered specifically to balance and lift factory Jeep hardtops using specialized brackets and hooks calibrated for standard hardtop shell weights and contours. An RTT introduces a vastly different center of gravity, heavier concentrated weight loads, and mounting configurations that standard hardtop hoist frames cannot safely secure.
Roof Top Tent (RTT) Removal: No, you cannot use this system to remove a roof top tent. The Hoist-a-Top is engineered specifically to balance and lift factory Jeep hardtops using specialized brackets and hooks calibrated for standard hardtop shell weights and contours. An RTT introduces a vastly different center of gravity, heavier concentrated weight loads, and mounting configurations that standard hardtop hoist frames cannot safely secure.
Doug W.
How close to the ceiling can the top be raised.
When using the Lange Originals 014-910 Power Hoist-a-Top, you can raise the hardtop to within 6 to 8 inches of your garage ceiling.
This clearance is determined by the size of the pulleys, the steel hook assembly, and the foam pads that cradle the Freedom Panels on top of the frame.
Pro-Tip: If you have a low ceiling (7 to 9 feet) and want to get the top as high as possible, mounting the power winch motor on the rear or side wall (rather than directly on the ceiling) is highly recommended. This removes the bulk of the motor from directly above the lift frame, allowing you to maximize your vertical storage space.
This clearance is determined by the size of the pulleys, the steel hook assembly, and the foam pads that cradle the Freedom Panels on top of the frame.
Pro-Tip: If you have a low ceiling (7 to 9 feet) and want to get the top as high as possible, mounting the power winch motor on the rear or side wall (rather than directly on the ceiling) is highly recommended. This removes the bulk of the motor from directly above the lift frame, allowing you to maximize your vertical storage space.
Mark O.
Can I mount the motor directly to my garage celling?
Yes, you can mount the motor for the Lange Originals Power Hoist-a-Top (014-910) directly to your garage ceiling, but there are specific requirements depending on your ceiling height and joist orientation.
Lange Originals recommends a ceiling mount configuration specifically for garages with ceilings over 9 feet tall. If your ceiling is between 7 and 9 feet, a wall-mount is usually preferred to maximize vertical clearance.
Mounting Requirements
Reinforcement: You should not bolt the motor directly into the drywall. The instructions specify mounting the power unit to a 2x6 wood base that spans at least two ceiling joists. This distributes the weight and torque of the motor safely across your garage's framing.
Orientation: * Perpendicular Joists: If your joists run perpendicular to the direction you park, you can span the 2x6 across them.
Parallel Joists: If they run parallel, you will need to install "cross-braced" 2x6 boards between the joists to create a solid mounting point for the motor bracket.
Plumb Line: You must ensure the motor is positioned so the cable drops in a straight vertical line to the balance blade on your hardtop to prevent sway and uneven lifting.
Lange Originals recommends a ceiling mount configuration specifically for garages with ceilings over 9 feet tall. If your ceiling is between 7 and 9 feet, a wall-mount is usually preferred to maximize vertical clearance.
Mounting Requirements
Reinforcement: You should not bolt the motor directly into the drywall. The instructions specify mounting the power unit to a 2x6 wood base that spans at least two ceiling joists. This distributes the weight and torque of the motor safely across your garage's framing.
Orientation: * Perpendicular Joists: If your joists run perpendicular to the direction you park, you can span the 2x6 across them.
Parallel Joists: If they run parallel, you will need to install "cross-braced" 2x6 boards between the joists to create a solid mounting point for the motor bracket.
Plumb Line: You must ensure the motor is positioned so the cable drops in a straight vertical line to the balance blade on your hardtop to prevent sway and uneven lifting.
Chuck L.
Does the JL Power Hoist A Top work for a 2024 Rubicon 4-door? I'm sure it would be just wanted to confirm before I order.
Yes, it will.
Chuck L.
Will this power hoist also work with a 2024 Rubicon 4-door?
Yes of course!
JAMES F.
Will this work with the pioneer roof rack & Rhino back bone system installed on the hard top?
Per Lange Originals, they state. Our framed hoists don’t work with a rack system, but we have had customers have success using a simple hoist because it doesn't have the frame.
They can also order a power unit separately if they want to upgrade. Thanks for your inquiry.
Ron B.
If I purchase this, is there someone that you can recommend in my area to do an install? I'm sure I probably could but would likely prefer to have a professional do it to ensure it's done properly.
Sorry, we do not have certified installer network for Lange Originals top hoists. Sorry for the inconvenience.
Daniel G.
will this work on 2021 392?
No major hardtop changes are anticipated on the 392 but it has not been tested yet. I Would be very surprised if they changed something that would not allow it. Thanks for your inquiry.
Daniel F.
My wife has a 2020 Jeep Willys 4 door. Will this work for her hardtop?
Sure will!
Chuck C.
Will this work for a 2015 Wrangler Unlimited 4 Door?
The JK Unlimited version is available here