AccuPart Front Hub and Bearing Assembly for 99-06 Jeep Wrangler TJ
Factory Fit: Designed to replace OEM front wheel hub assemblies for 1999-2006 Wrangler TJ.
Ready to Ride: Bearings are already precision pressed and fitted, and wheel studs are included, making replacement of your old assembly straightforward.
Superior Quality: High-grade materials and craftsmanship ensure dependability and optimal performance.
Protection Against the Elements: Special quad lip seal keeps dirt and moisture out to prevent damage and ensure longevity.
Peace of Mind: Buy with confidence knowing this assembly is backed by a one-year warranty.
Does your steering wheel shake when you drive? Have you noticed growling, humming, or squeaking from your tires while driving? It’s probably time for a new wheel hub assembly, and AccuPart Front Hub and Bearing Assembly for 1999-2006 Wrangler TJ is the perfect replacement option.
This assembly is precision designed to be an exact replacement to OEM front wheel hub assemblies. The bearings are machine-pressed and the assembly comes with five wheel studs, meaning you’ll have everything you need for a total front wheel hub assembly replacement. Not only will you be back on the road in no time, but the quality materials and craftsmanship are backed by AccuPart’s One-Year Warranty so you can ride with confidence.
Replaces Mopar Part # V2506458AA
- Features: Steel
- Color: Bare Steel
- Shipping Weight: 11lb
- Shipping Dimensions: 6in x 6in x 5in (L x W x H)
Jeep Wrangler (TJ)
- 2006 Jeep Wrangler (TJ)
- 2005 Jeep Wrangler (TJ)
- 2004 Jeep Wrangler (TJ)
- 2003 Jeep Wrangler (TJ)
- 2002 Jeep Wrangler (TJ)
- 2001 Jeep Wrangler (TJ)
- 2000 Jeep Wrangler (TJ)
- 1999 Jeep Wrangler (TJ)
Jeep Wrangler Unlimited (LJ)
- 2006 Jeep Wrangler Unlimited (LJ)
- 2005 Jeep Wrangler Unlimited (LJ)
- 2004 Jeep Wrangler Unlimited (LJ)
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Questions
The Hub Design: Most TJ front hubs are "ABS-ready," meaning they have the machining for an ABS sensor to sit over the bearing. However, this specific part is a standard replacement and does not come with the electronic sensor.
Recommendation: If your ABS system is functioning, you will need to carefully swap your old ABS sensor and tone ring (if applicable) over to the new hub. If your old sensor is seized or damaged, you should look for a hub that includes a pre-installed ABS sensor.
Recommended Alternative for ABS
If you want a hassle-free installation for an ABS Jeep, consider a hub assembly that explicitly includes the sensor, such as the Crown Automotive Front Hub Assembly. These often come with the sensor already mounted and the wiring harness attached.