Home » Jeep Audio & Electronics » Audio Accessories » Amplifiers » Alpine KTA-30FW Four Channel Tough Pack Amplifier

Alpine KTA-30FW Four Channel Tough Pack Amplifier

Quadratec Part #: 96087.4540
Alpine Part #: KTA-30FW

Alpine knows it's more than likely that you'll take your Wrangler off-road. They certainly know that taking the top off is almost a guarantee. That's why they've developed the KTA-30FW Four Channel Tough Pack Amplifier. What's the reasoning behind developing this waterproof amp? You: the customer. They've taken the feedback from countless Jeep owners and enthusiasts that drive off road through tougher dustier terrain and trails, all the way to owners that are simply just looking for protection against the elements when they put their top down. The IP66 rating means it's safe against dust, dirt, puddles, and precipitation. Alpine made sure this amp will be able to hold its own when you and your Wrangler brave the elements.

Another big feature that Alpine has incorporated into their Tough Pack Amps is their proprietary DPP, or Dynamic Pulse Power, technology. DPP quickly increases the internal gain level of the amplifier when it encounters louder and more abrupt audio signals. When the amplifier recognizes the boost in signal, the gain is raised effectively doubling the required amount of power. The compact size of the Mono Tough Pack Mono Amp allows it to be installed in the factory location with the factory underneath the dash on the driver's side.

Need the whole system? Check out the Alpine PSS-22WRA Waterproof Sound System.


KTA-30FW Four Channel Tough Pack Amplifier Specs:

    Class: D

    Dynamic Pulse Power (DPP) Equipped: Yes

    Power: 150W DPP x 4 @ 2Ω/4Ω, 14.4V, ≤1% THD+N

    Root Mean Squared: 75W RMS x 4 @ 2Ω/4Ω, 14.4V, ≤1% THD+N (CTA-2006-B compliant)

    Signal to Noise (1W into 4Ω): >85dB

    THD (ref. 1W into 4Ω): <0.1%

    Frequency Response: 20-20kHz (+/- 1dB)

    Waterproof Rating: IP66 rating

    Inputs: Speaker/RCA inputs (selectable, High range = 0.5-10V, Low range = 0.2-4V)

    Sound Control: Crossovers - Off/HP/LP, Fc = 50-400Hz @ -12dB/Oct. (variable); Input gain settings (variable); 2ch/4ch input (selectable)

Installation Notes
Installation Difficulty:
Level 2Intermediate
Installation Time: 1-2 hours
Parts Included
Limited 1 Year Warranty
  • Shipping Weight: 3lb
  • Shipping Dimensions: 12in x 8in x 4in (L x W x H)
Share Your Thoughts
Review Summary
Shared Media

Customer Submitted Photos

Alpine KTA-30FW Four Channel Tough Pack Amplifier Reviews