Completely revolutionize the audio experience in your Wrangler JL and Gladiator JT with the Alpine PSS-24WRA Complete Sound System Upgrade. This 300-watt kit is designed specifically for more power and features two 6.5” speakers, two rear soundbar speakers, two 1” tweeters, an 8” sub-woofer, and four-channel power packed amplifiers. Unlike other replacement speakers and sub-woofers on the market, Alpine specifically tuned this entire system for Jeep Wrangler. All wiring, adapters, and connectors are included to install this plug-n-play kit into your Jeep. Best of all, you do not need to worry about damaging the PSS-24WRA when your top is down, because every component has a minimum of IP55 waterproof rating.
Installation Note: On 2-door Wranglers, the PSS-24WRA will fit 2019 and newer Jeeps ONLY. It is not compatible with two-door Wranglers that have scissor style seat brackets, so it will not fit the 2018 2-door Wrangler JL. The PSS-24WRA is NOT compatible with the OEM Factory Alpine premium sound system.
Complete Package: The PSS-24WRA Complete Sound System Upgrade includes everything you need to take your Jeep’s audio to the next level. With the high-performance replacement speakers, sub-woofer, and amplifiers, you will be able to get the most from your factory or aftermarket stereo.
SPV-65X-WRA Replacement Speaker Specs:
Woofer Diameter: 6-1/2”
Tweeter Diameter: 1”
Peak Wattage: 225 watts
Frequency Response: 65Hz – 22kHz
Impedance: 4 ohms
Sensitivity: 88 dB SPL (1 W @ 1m)
Waterproof Rating: IP55
SPV-65-JLT Soundbar Specs:
Power: : 90 Watts RMS (270 Watts peak)
Frequency Response: 50Hz – 22kHz
Impedance: 4 ohms
Waterproof Rating: IP55
PWE-S8 Sub-Woofer Specs:
Speaker Diameter: 8”
Peak Wattage: 240 watts
Frequency Response: 32Hz – 150Hz
Waterproof Rating: IP66
KTP-445U Four Channel Amplifier Specs:
Power: 45W RMS x 4 @ 2Ω/4Ω 90W RMS x 2 @ 4Ω,
Frequency Response: Selectable high-pass filters (60Hz, 80Hz, or 120Hz at 12dB)
Waterproof Rating: IP66 rating
Inputs: Switchable RCA inputs or speaker-level inputs
Cutting of Speaker Housing Required
Not Compatible with OEM Premium Amplifier and Subwoofer
Not Compatible with 2018 2-Door Wranglers
- PWE-S8 - 8” Compact Powered Subwoofer
- SPV-65-JLT - Rear Soundbar Speakers
- KTP-445U - 4-Channel Power Amplifier
- SPV-65X-WRA - Front Component Speakers
- ALP-POD-JLT - Front Speaker Pods
- PSU-BKT-JL - Brackets (Left & Right)
- ALP-HRN-PSU300 - Power Harness
- ALP-THRN-CH2 - Chrysler T-Harness
- CT6 6” Cable Ties
- PHPSM412 Pan Head Phillips Screws (M4 x 12)
- SLWM4 M4 Split Lock Washers
- PHSCR832 8-32 Pan Head Phillips Screws
- Installation Manual
- Shipping Weight: 23lb
- Shipping Dimensions: 25in x 22in x 10in (L x W x H)
Jeep Gladiator (JT)
- 2025 Jeep Gladiator (JT)
- 2024 Jeep Gladiator (JT)
- 2023 Jeep Gladiator (JT)
- 2022 Jeep Gladiator (JT)
- 2021 Jeep Gladiator (JT)
- 2020 Jeep Gladiator (JT)
Jeep Wrangler 2-Door (JL)
- 2023 Jeep Wrangler 2-Door (JL)
- 2022 Jeep Wrangler 2-Door (JL)
- 2021 Jeep Wrangler 2-Door (JL)
- 2020 Jeep Wrangler 2-Door (JL)
- 2019 Jeep Wrangler 2-Door (JL)
- 2018 Jeep Wrangler 2-Door (JL)
Jeep Wrangler Unlimited 4-Door (JL)
- 2023 Jeep Wrangler Unlimited 4-Door (JL)
- 2022 Jeep Wrangler Unlimited 4-Door (JL)
- 2021 Jeep Wrangler Unlimited 4-Door (JL)
- 2020 Jeep Wrangler Unlimited 4-Door (JL)
- 2019 Jeep Wrangler Unlimited 4-Door (JL)
- 2018 Jeep Wrangler Unlimited 4-Door (JL)
Not Compatible with 2-Door Wranglers
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Alpine PSS-24WRA Complete Sound System Upgrade Reviews
I installed this system on my ‘22 JT a few months ago. I followed Alpine’s recommendations on amp/sub setting and installed as directed. The system sounded OK, but I wasn’t overly impressed. There wasn’t much additional bass. The speakers would start clipping when the radio volume was only about half way up. I started looking at other reviews from various distributors and saw that many of them recommended turning the sub and amp 180° on the brackets so you can adjust the gain screws. After turning the amp gains down and the sub gain up, the system sounds so much better. For the sound quality and the ease of installation, I’d give it 5 stars. I’m only deducting one star since the baseline settings from Alpine were terrible and that you can’t adjust them once everything is installed per the installation directions.
love new sound
Questions


