Anzo USA L.E.D. Parking Light with Sequential Turn Signal for 18-24 Jeep Wrangler JL

Excellent, the lighting is strong and appropriate, easy to install, there are no errors and you do not need to flash a dealer, a reasonable price I recommend.

I order these to replace Morimoto sequential turn signals, I bought from another dealer, a little over a year ago. The Morimoto sequential lights never worked correctly. They ended up suggesting I buy an additional $300 for a Tazer that MIGHT correct the non-working sequential issue. I ended up buying these and the sequential feature works correctly. They look great and are a cheaper option than buying a Tazer. The only issue I have are the warning errors on the dash. They go off every once in a while even if the lights are working correctly. They are clear plastic which looks much better than the tint the Morimoto's have on their turn signals. 4 stars for over all appearance, and properly working sequential feature. Minus one star for dash error.

Not worth the trouble. No instructions, so you better be familiar with how to take apart your fender and separated from the body of your jeep. No indication of which is left or right, though you can figure it out. Once you clip the plug into the Jeep wiring harness plug, you can’t get them to separate again no matter how hard you press the little flimsy plastic tab. So if you want to test these lights before installing them be aware that you should have the wiring already run. Also there are three screws that attach a plastic reinforced reinforcement panel to the back of the light. These three screws do not properly seat in the same holes and will just spin without tightening. Finally, The stock amber LED side marker does not light up on either side after installing. I triple checked the wiring and it’s not anything I’ve done wrong. So now they are a safety hazard on top of everything else. Now I know why these were so cheap. Avoid!!!