Crown Automotive 68143894AB Cooling Fan Module for 12-18 Jeep Wrangler JK
Quadratec Part #:
51212-0103
Crown Automotive Part #:
68143894AB
Description
The Crown Automotive Cooling Fan Module is a plug and play replacement for the JK Wrangler with a 3.0L or 3.6L engine. If your electric fan has burned out and your cooling system is struggling to keep up, then Crown has the remedy. With no modifications to the Jeep or the wiring, this module installs with the original hardware and connects to the factory wiring with an OE connector. Keeping your engine in the optimal temperature zone increases fuel economy and prolongs the life of the engine.
Popular Similar Items
Details
For the Following Applications:
- 2012-2018 JK Wrangler w/ 3.6L Gasoline Engine
- 2014-2018 JK Wrangler w/ 3.0L Gasoline Engine
- Engine Size: 3.0L, 3.6L Pentastar V-6
- Engine Fuel: Gasoline
- Shipping Weight: 16lb
- Shipping Dimensions: 29in x 24in x 8in (L x W x H)
Jeep Wrangler 2-Door (JK)
- 2018 Jeep Wrangler 2-Door (JK)
- 2017 Jeep Wrangler 2-Door (JK)
- 2016 Jeep Wrangler 2-Door (JK)
- 2015 Jeep Wrangler 2-Door (JK)
- 2014 Jeep Wrangler 2-Door (JK)
- 2013 Jeep Wrangler 2-Door (JK)
- 2012 Jeep Wrangler 2-Door (JK)
Jeep Wrangler Unlimited 4-Door (JK)
- 2018 Jeep Wrangler Unlimited 4-Door (JK)
- 2017 Jeep Wrangler Unlimited 4-Door (JK)
- 2016 Jeep Wrangler Unlimited 4-Door (JK)
- 2015 Jeep Wrangler Unlimited 4-Door (JK)
- 2014 Jeep Wrangler Unlimited 4-Door (JK)
- 2013 Jeep Wrangler Unlimited 4-Door (JK)
- 2012 Jeep Wrangler Unlimited 4-Door (JK)
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Questions
Michael P.
Does this come either the two fan shroud to radiator fasteners (fixed washer hex head machine screws and nuts) for top of the assembly and/or what are the fasteners’ size? Thanks.
The Crown Automotive 68143894AB Cooling Fan Module does not include the two mounting fasteners (bolts and nuts) for the top of the assembly. It is designed to be installed using your existing factory hardware.
If your original hardware is missing or damaged, you will need to source replacements with the following specifications:
Size: M6 x 1.0 (Metric 6mm with a 1.0 thread pitch).
Head Type: Generally an 8mm or 10mm hex head with a fixed/integrated washer (flange bolt).
Length: Approximately 20mm to 25mm is standard for these shroud-to-radiator mounting points.
If your original hardware is missing or damaged, you will need to source replacements with the following specifications:
Size: M6 x 1.0 (Metric 6mm with a 1.0 thread pitch).
Head Type: Generally an 8mm or 10mm hex head with a fixed/integrated washer (flange bolt).
Length: Approximately 20mm to 25mm is standard for these shroud-to-radiator mounting points.