Crown Automotive RT26076 Adjustable Spare Tire Spacer for 76-18 Jeep CJ and Wrangler

Just what I needed to put my spare tire on the back of my jeep

Found several issues, first no parts list in the box or instructions. Looked at the picture and easily figured it out. The slot for the bottom bolt attaching to the existing frame is too short by 1/8". Took a rubber hammer and beat it on versus chilling the frame and trying to cold fit it. Next the recessed holes to attach to the new mount are too small, tried to jam a 3/4 opened end wrench but that didn't hold and was galling the recess. Then went web shopping for a thin walled 3/4", found one on Amazon but reading the reviews found that Craftsman has the narrowest wall. Found one in my tool box, smaller than Stanley and SK. had to wedge it sideways to tighten properly. Next had to chase the internal threads for the new lugs because the new lugs would not even start. Also short on parts, had to use an old lug nut to secure the mount, knew I was in trouble when there was no parts list in the box or instructions and the nuts and bolts were loose in the box. After several adjustments, moved the adjustment for the lugs all the way to the left so that it no longer hits the passenger tail-light assy. Pleased with the final product, but too much after purchase engineering. Should have been no more than 15 minutes max, but it took several hours all totaled.