Crown Automotive 4686094 Flasher Relay for 99-04 Jeep Grand Cherokee WJ

Perfect replacement for the wore out OEM relay, my blinkers finally work properly again!

I got this because the factory relay is notorious for having weak solder joints. I plugged it and all problem were solved. Then about 6 months later, my right turn signal stopped working. I feared that the solder joints may have broken, like with the OEM. But when I removed the relay and then took the plastic cover off, I realized that all of the solder joints looked strong and complete. The problem was that one of the two large copper colored squares that act as the switch for each turn signal had become dislodged from its holding bracket. So I stuck the square back in its bracket, and all problems were solved. So just as a heads up, don't junk these if they fail. Take a moment to pull the cover off and see if there is an obvious issue that can be easily resolved.