Crown Automotive 52105758AE Front Drive Shaft for 05-06 Jeep Grand Cherokee WK and Commander XK
Quadratec Part #:
52302-0027
Crown Automotive Part #:
52105758AE
Description
Unfortunately there is no CV repair kit available for this drive shaft, so if your Jeeps CV Joint is going bad you will need a new drive shaft. The Crown Automotive Front Drive Shaft for Grand Cherokees and Commanders is a direct fit shaft that has a new cv joint for the transfer case connection and u-joint at the axle. No brackets or adapters are needed and this drive shaft is for Jeeps with original suspension travel, lifted vehicles may need an extended drive shaft.
Details
CV Joint at Transfer Case End, Flanged U-Joint at Axle End
Collapsed Length: 30"
Extended Length: 33"
For the Following Applications:
Collapsed Length: 30"
Extended Length: 33"
For the Following Applications:
- 2005-2006 Jeep® Grand Cherokee WK w/ 3.7L Engine
- 2006 Jeep® Grand Cherokee WK w/ 6.1L Engine
- 2006 Jeep® Commander XK w/ 3.7L Engine
- Engine: 3.7L, 6.1L
- Transmission: Automatic, Manual
- Location: Front
- Shipping Weight: 18lb
- Shipping Dimensions: 37in x 5in x 5in (L x W x H)
Jeep Commander (XK)
- 2006 Jeep Commander (XK)
Jeep Grand Cherokee (WK)
- 2006 Jeep Grand Cherokee (WK)
- 2005 Jeep Grand Cherokee (WK)
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Questions
Kyle W.
What are the specs of this shaft length? Center to center on bolts? Will this fit an 05 WK with a 4.7l?
Sure thing, the overall length is 41.25", they fit the Jeep Grand Cherokee (WK) (2005-2006) w/ 3.7L engine ; Jeep Grand Cherokee (WK) (2006) w/ 6.1L engine and the Jeep Commander (XK) (2006) w/ 3.7L engine only (CV Joint at Transfer Case End; Flanged U-Joint at Axle End).
