» » »

Currie Enterprises Extreme 60VXR Rear Crate Axle Assembly for 18-21 Jeep Wrangler JL & Gladiator JT

Description

Be ready for the trails with this high pinion Extreme 60VXR Rear Axle Assembly for your Jeep Wrangler JL. Giving you the ability to run up to 40 inch tall tires and handle the power of an upgraded engine without fear. A direct bolt-on rear axle assembly with premium features. Such as a beefy 3.5-inch axle tube (.375 wall DOM), full-floating axles, larger brakes, and reinforced radius bottom with replaceable skid plate. This complete axle assembly will allow you to play hard and get back home with confidence. Enjoy the outdoors and have fun.

Details

Extreme 60VXR Rear Crate Axle Assembly All-Inclusive Specifications:

Gear Set - Standard Dana 60 (Compatible with super 60 reverse gears)
Ring Gear Load Bolt - 3/4" 16 RH thread with jam nut (eliminates deflection under load)
Yoke Size - 1350 U-joint
Axle Tubes - 3.5" diameter / .375 wall DOM tubing
Axles - Full Floating 35 spline count (1.5" diam) / 4340 Chromoly
Floating Hub/Spindle - JK tone rings (for ABS & ESP) / 2.5" 4140 Chromoly spindle
Brakes - 12" Vented Rotors / OEM JK rear calipers (HD 3/16" Mounting brackets with multiple
Geometry - 5 degrees pinion angle (optimal for 4" lift)
Width - 70" wide (4.6 inches wider than stock)
Bolt Pattern Options - 6x5.5 (1/2" studs) or 8x6.5 (9/16" studs)
Paint Finish - Black Satin PowderCoat
Truck Freight Weight and Dims - 380 lbs / 82"x26"x21"

High Ground Clearance: Extreme Reinforced axle assembly with radius bottom center section allowing your Jeep Wrangler JL to slide over obstacles without getting caught up. A replaceable AR400 hardened steel skid plate helps protect the housing from trail damage. Offering the highest ground clearance of any 60 in the market... Boom.

Nodular Iron Diff Cover: Finished in a bold textured red powder-coat protecting the inner workings of the axle assembly. A build-in dipstick on the fill plug provides quick access to check the gear oil level (85W-140).

Ultimate Extreme Full Floating Design: This premium design isolates the axles from the stress of vehicle weight and side loads for optimal strength. Offering a high flow oil system that bearings lubed and cool with superior circulation. Keeping all the components properly lubricated for a long-lasting dependable assembly. The 3.5" axle tube is 3 times stronger than the factory Dana 44 tube.

Installation Notes

Installation Difficulty: