Home » Jeep Engine & Fuel System » Engine Tuning » Hand Held Programmer » Diablosport PKITJK363016-I3 Modified PCM And i3 Performance Tuner for 2016 Jeep Wrangler JK/Rubicon

Diablosport PKITJK363016-I3 Modified PCM And i3 Performance Tuner for 2016 Jeep Wrangler JK/Rubicon

Catalog #: 17617.4002
Diablosport Part #: PKITJK363016-I3
Description
Diablosport offers this modified powertrain control module (PCM) that replaces the factory PCM. 2015 Jeep Vehicles come from the factory with an encrypted (locked) PCM that cannot be tuned. Because of this, DiabloSport handheld tuners will not work with any 2016 and up FCA vehicle with an unmodified (stock) PCM. These vehicles require a DiabloSport modified PCM installed prior to any tuning. Each DiabloSport PCM is year, make and model specific. These PCM modules are only compatible with the DiabloSport brand tuners and will not work with Edge or Superchips line of handheld tuners. Compatible tuner lines include: inTune i2, inTune i3, Trinity, and Trinity T2 tuners. The inTune i3 Tuner included in this kit is an easy way to boost power and torque without even popping the hood! You get a performance tuning upgrade that makes your throttle more responsive, optimizes drivability, improves fuel economy potential and increases horsepower and torque! The Platinum i3 is designed for those who want the best of both worlds, pre-loaded, high-performance tunes in addition to custom tuning capability. The i3 Platinum is already equipped with some of the best tuning right out of the box but also features CMR custom tuning. The nationwide network of CMR custom tuning dealers can build tunes for your specific ride on a dyno or by using the built-in data logging features of the i3. Now you can have great tunes for now, and custom tunes for when you take your ride to the next level with the Platinum i3. The i3 is equipped with additional vehicle license options, you can tune multiple vehicles with one device. If your i3 is currently tuned into your Jeep Wrangler JK, but you also want to tune your other Utility Vehicle, upgrade your i3 with an additional license through Diablosport's Ignition Update Software and you can be tuning both vehicles in no time. The additional i3 licenses can program any make or model that the i3 supports so you can tune basically anything. With the new "Easy Tune" mode you can add horsepower and torque within minutes with no other tools required! Diablosport's goal is to make the biggest power gain, with the largest choice of performance options.

Warning: Due to the legal limitations on custom built tunes, DiabloSport modified PCM’s are not street legal and may only be used on off-road vehicles.

CARB Notice

  • Legal in California, or other states adopting California emissions standards, only for racing vehicles that may never be used, registered or licensed for use, upon a highway. Can not be shipped to California residents.
Details

PCM Modification: Swapping PCM Modules is quick and easy, typically only taking 20-30 minutes using common hand tools. Once you have replaced the factory PCM, you can install a tune with your DiabloSport tuner of choice and you’re ready to go. If at any time you need to go to the dealership for service, re-install your original PCM and the dealer will not be able to tell that any modifications to your vehicle computer are present.

i3 Tuner multi-vehicle Licenses: i3 can tune your whole driveway! With the i3’s additional vehicle license options, you can tune multiple vehicles with one device. If your i3 is currently tuned into your Jeep JK, but you also want to tune your Cherokee, upgrade your i3 with an additional license through Diablosport's Ignition Update Software and you can be tuning both vehicles in no time. The additional i3 licenses can program any make or model that the i3 supports so you can tune basically anything.

i3 Tuner Features: Tuner is equipped with a new “Easy Tune” Mode for Simple Installation. The i3 also features Blazing Fast Vehicle Read/Write Times.

Connectivity: The i3 enables you to connect to Windows, Mac OSX and Linux operation sytems. OBD-II Data Logging and Read and Clear DTC are also included to make this unit deliver some of the best tuning right out of the box.

Installation Notes
Installation Difficulty:
Level 2Intermediate
Installation Time: 2-3 hours
Parts Included
  • i3 Performance Tuner
  • powertrain control module (PCM)
  • All Hardware and Cables
  • Detailed Instructions
Warranty
1 Year Warranty
  • Engine Size: 3.0L, 3.6L Pentastar V-6
  • Jeep Wrangler 2-Door (JK)

  • 2016 Jeep Wrangler 2-Door (JK)
  • Jeep Wrangler Unlimited 4-Door (JK)

  • 2016 Jeep Wrangler Unlimited 4-Door (JK)
Share Your Thoughts
Review Summary
Shared Media
Questions

Customer Submitted Photos

Diablosport Modified PCM And i3 Performance Tuner Reviews