Diode Dynamics DD4025 LED Light Bulb Load Resistor Kit -Pair
Quadratec Part #:
97063-0299
Diode Dynamics Part #:
DD4025
Description
This Diode Dynamics Resistor Kit prevents Hyperblinking. When you replace incandescent turn signal bulbs with LEDs in most vehicles, the vehicle will start hyperblinking. This is because the LED uses much less power, and the vehicle thinks the bulb is out. You can easily fix this problem by installing resistors.
Note: We recommend one resistor per turn signal bulb that is switched to LED. If you are installing both front and rear turn signal bulbs, we recommend four total resistors.
Popular Similar Items
Details
Installation Each resistor has 6" leads for easier installation, and has a rating of 50 watts, 6ohm. This is usually enough to compensate for one bulb. If you are installing four LED turn signals (front and rear), we recommend four total resistors.
- Shipping Weight: 1lb
- Shipping Dimensions: 5in x 4in x 1in (L x W x H)
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review