Fabtech FTS24211 Interior Cargo Rack for 18-24 Jeep Wrangler JL Unlimited with Hardtop
If you are taking your Wrangler Unlimited JL on vacation or a camping trip you will need all the extra room you can get for your gear. The Fabtech Interior Cargo Rack is a perfect solution to add more storage space to your JL. This heavy duty steel cargo rack goes behind your rear seat bolting into existing holes giving you an easy no drill installation. The slotted holes around the base of the rack allow for you to attach bungee cords or rope to hold down your cargo preventing it from sliding around or falling out.
This rack will not allow you to fold down your soft top and is best used with 4 Door JL models with hardtop
Not for use with One Touch Power Soft Top
Heavy Duty Design: This three piece cargo rack is made of steel plates that bolt into the existing holes of your side rails giving you a secure & rattle free experience when hauling around your cargo. The black powder coat finish has edge molding to protect against rust while preventing scraps and cuts as you access your cargo. Fabtech has made sure to test this rack in the most extreme off road conditions to provide you with the strongest interior rack there is for your JL. With a support weight of up to 150lbs, you will be able to store all of the gear you need when traveling & camping.
Extra Storage Space: Sitting 22" above the cargo area floor this 18 x 36" rack will provide you with an extra 4 1/2 square feet of flat storage space.
- Features: Steel
- Color: Black
- Shipping Weight: 41lb
- Shipping Dimensions: 24in x 8in x 7in (L x W x H)
Jeep Wrangler Unlimited 4-Door (JL)
- 2024 Jeep Wrangler Unlimited 4-Door (JL)
- 2023 Jeep Wrangler Unlimited 4-Door (JL)
- 2022 Jeep Wrangler Unlimited 4-Door (JL)
- 2021 Jeep Wrangler Unlimited 4-Door (JL)
- 2020 Jeep Wrangler Unlimited 4-Door (JL)
- 2019 Jeep Wrangler Unlimited 4-Door (JL)
- 2018 Jeep Wrangler Unlimited 4-Door (JL)
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Fabtech Interior Cargo Rack Reviews
The rack has strong material with nice heavy duty coating.
Installation took not more than 15 min and it fits perfectly to JLU
Only one issue to note; if you have the Rhino Rack Backbone system for your Jeep, this rack must be altered for the legs to fit in conjunction with the Backbone anchors. I love the look of this rack and will be taking the legs to a metal fab shop nearby for trimming.
Installed the rack this afternoon. The product appears to be well made and fits well. The install would have taken 30 minutes, including unboxing, but the lock nuts wouldn't fit the 3/8 bolts. All of the bolts were heavily coated with galvanizing and I had to run a 3/8-16 die over the bolts. For $300.00 one would think the bolts would at least be usable. If you get a package of out of spec bolts be prepared to clean up the threads or make a trip to the hardware store.
Questions
