Fairchild Industries Liftgate Glass Seal & Plastic Retainer Kit for 07-18 Jeep Wrangler JK

Hoping some one will see this when ordering. Would recommend that you also go ahead and order A glass adhesive such as the CR Laurence PP301HV found here : https://www.quadratec.com/products/52152_06.htm when you order this. Under the questions below Quadratec says there is "adhesive backing provided for install" HOWEVER, that is for the seal to the retainer. My old retainer needed to be replaced so I thought I would replace seal as well. The product page for JUST the retainer has the above note of getting a glass adhesive, I had to go find a substitute epoxy at auto store but would have preferred ordering the product above for my install.

Seal and plastic pc combined

Installs fairly easy. Removing 1 gas strut makes it easy to position the window. It doesn't come with adhesive, I do recommend test fitting everything before gluing the plastic on. After gluing the plastic, come back after it has set up and then install the rubber seal so it stays in position properly.