HyLine OffRoad 400.300.120 Rocker Guards for 07-18 Jeep Wrangler Unlimited JK
Made in USA: Finished with a lightly textured black powder coat and manufactured using 18ga aluminum, these rocker guards will protect against shoe scuffs and road debris while covering up the pinch seem.
No Drilling: Use provided double sided tape to adhere to your Jeep's rocker panel.
Please Note: These are designed to work with the HyLine Offroad JK Rock Sliders. They will work with other steps and/or rock sliders, but some light modification may have to be done to trim the rocker guards just around the pinch seam mounting brackets. They are not for use with OEM Rubicon Rock Rails.
- Features: Step
- Color: Black
- Armor Type: Rocker Guards
- Material: Aluminum
- Shipping Weight: 9lb
- Shipping Dimensions: 77in x 12in x 2in (L x W x H)
Jeep Wrangler Unlimited 4-Door (JK)
- 2018 Jeep Wrangler Unlimited 4-Door (JK)
- 2017 Jeep Wrangler Unlimited 4-Door (JK)
- 2016 Jeep Wrangler Unlimited 4-Door (JK)
- 2015 Jeep Wrangler Unlimited 4-Door (JK)
- 2014 Jeep Wrangler Unlimited 4-Door (JK)
- 2013 Jeep Wrangler Unlimited 4-Door (JK)
- 2012 Jeep Wrangler Unlimited 4-Door (JK)
- 2011 Jeep Wrangler Unlimited 4-Door (JK)
- 2010 Jeep Wrangler Unlimited 4-Door (JK)
- 2009 Jeep Wrangler Unlimited 4-Door (JK)
- 2008 Jeep Wrangler Unlimited 4-Door (JK)
- 2007 Jeep Wrangler Unlimited 4-Door (JK)
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
HyLine OffRoad Rocker Guards Reviews
Do NOT buy this Rocker Guard unless you are a resourceful fabricator. They will NOT fit right out of the box. The double stick tape and fold-over tabs are pure junk. Although the aluminum used is of good quality. The bends in the rocker guard DO NOT match the bends in the Jeep's rocker panel down at the pinch seam. Now, I cut the lower 3/4 of an inch of the rocker guard off that is supposed to cover the pinch seam. Painted the pinch seam black and install the rocker guard with #4x1/2" metal screws. With the lower most part of the rocker guard removed, it is a pretty good fit but the $180 price tag is ridiculous for having to do this type of fabricating.
