ICON Vehicle Dynamics 45212 XD Tie Rod Kit for 21-23 Ford Bronco
Built for Strength: Inner tie rod and ball stud is CNC machined from 4140 chromoly and outer tie rod is forged steel.
Extended Life: Metal-on-metal joint that is greaseable for extended service life and has the same range of operating angles as the stock tie rod ends.
Improvement Over OEM: 30% larger diameter than OE tie rods.
TECH NOTE: Not compatible with Bronco Raptor TECH NOTE: Not compatible with aftermarket tie rod bracesThese ICON XD Forged Tie Rods for Bronco strengthen an exposed weakness with better materials and beefier dimensions than the stock units. The inner tie rod and ball stud is CNC machined from 4140 chromoly. The adjustment threads, where we've seen most of the failures happen on stock tie rods, are 18 mm on the XD Forged Tie Rods versus 14mm on stock Bronco tie rods. The outer tie rod is forged steel and has the same bend as the stock tie rods for fitting all the Bronco's factory wheel diameters and offsets, along with just about any aftermarket wheel. The tie rod end is a beefier, metal-on-metal joint that is greaseable for extended service life and has the same range of operating angles as the stock tie rod ends. For the most hardcore off-roaders, the ICON XD Forged Tie Rod kit is recommended as part of a comprehensive steering system upgrade strategy.
- Shipping Weight: 7lb
- Shipping Dimensions: 30in x 8in x 3in (L x W x H)
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review