Linkswell TS-JPJL12-1RR-6H GEN 6 T-Style 12.1" Mulitmedia System for 18-23 Jeep Wrangler JL & Gladiator JT

I have installed a lot of stereos in many different model cars, and this one can test your patience. The sole reason is the size of the wiring harness. Jeeps don't have a large dash, and this harness will take every bit of it behind the radio. As far as wiring, there is no splicing to match the factory harness, it is all plug and play. You will have to tuck a lot of extra wiring in every empty space you can find though. As far as fit, once you get the harness to cooperate, the fit is awesome. I've seen other reviews that the passenger side doesn't line up right, but if done correctly it lines up fine. I took all the white clips off the climate control and put them on the radio where they are supposed to go and the radio will clip in without the screws, but being the harness is tight behind it don't skip the screws. No installation video or write up I found mentioned the clips. The radio itself is reactive and fast to load. Everything I have done with it is almost as fast as my android phone itself. Being that you can load apps from the app store i can run my garage from it, work my rock lights with it via Bluetooth, and other stuff right from the unit. The gain out of the box needs to be adjusted if you have stock speakers otherwise you're going to end up blowing up your stock dash speakers. I found 16 to be the sweet spot so far but still playing with it. Overall very easy install other than the size of the harness. If I were to build the radio I would make all the connectors 90° out of the rear of the unit instead of the bottom, shorten the harness, and remove wiring not commonly use from the main harness and make them plug in their own spot if needed.