LoD Offroad Signature Series Full-Width Front Bumper with Bull Bar and D-Ring Tabs for 18-24 Jeep Wrangler JL & Gladiator JT

Installed and operational, very well built. I went with a mid length. Only challenge is there are no directions included so you will need to find them. https://lodoffroad.com/assets/pdfs/JL18FBSSINS.pdf. Theses seem to be the best. Bolting on the front, have a flex head box end and put tape on the back, it’s very tight when laying on the ground. It took about 3 hours by myself.

Great bumper. It was easy to install, just make sure to put the winch in first. I learned this the hard way. Some of the bolts were difficult to put in due to tight spaces, but managed with some angled extensions. The bumper looks great and is well made. Installed on a 21 JL Rubicon.

Fantastic build quality, made in the USA, and compared to other bumpers it looks outstanding. I've only had this bumper on for a few weeks, but the powder coat seems really tough. Contrary to some other reviews I've seen online, my bumper came with a great packing list and all the necessary hardware for install. Not a single piece was missing. I plan to add a winch later on. Only a few things I noticed:
1. It does not come with any instructions, and the instructions on the website are not very clear on multiple steps. I got it figured out though, just had to backtrack.
2. I reused the fog lights from my sport plastic bumper, and although this bumper
came with adapters for them, they still required drilling into the fog light housing. If you have a 4-bolt Rubicon or Sahara style fog light, you should be good to go. It even comes with the necessary mounting hardware for both styles.
3. You will need a 5/8" deep socket to install this bumper and depending on your ratchet you may need an extension too.