Mopar 68322798AA Front Lower Control Arm for 18-24 Jeep Wrangler JL with 2" Mopar Lift
Quadratec Part #:
56015-0324
Mopar Part #:
68322798AA
Description
The Mopar Front Lower Control Arm for the JL Wrangler is a replacement for the extended, redesigned control arm that is included with the Mopar 2" Performance Suspension. Control arms are integral to the Jeep suspension and with the proper length control arms, your front axle maintains its position under heavy abuse while on the road and on the trail. Engineered to maintain the wheel's caster, with the wrong control arms you may notice shorter tire tread-life as well as wheel and tire oscillation at higher speeds. Wrangler JL owners with stock suspensions have benefit from the redesign, choosing to swap OE arms with these longer arms for better control.
Please Note : Sold Individually, Must be purchased in pairs for initial installation.
Please Note : Sold Individually, Must be purchased in pairs for initial installation.
Popular Similar Items
Details
- Features: Steel
- Color: Black
- Lift Height: 2
- Location: Front
- Upper/Lower: Lower Control Arms
- Shipping Weight: 10lb
- Shipping Dimensions: 29in x 7in x 5in (L x W x H)
Jeep Wrangler 2-Door (JL)
- 2024 Jeep Wrangler 2-Door (JL)
- 2023 Jeep Wrangler 2-Door (JL)
- 2022 Jeep Wrangler 2-Door (JL)
- 2021 Jeep Wrangler 2-Door (JL)
- 2020 Jeep Wrangler 2-Door (JL)
- 2019 Jeep Wrangler 2-Door (JL)
- 2018 Jeep Wrangler 2-Door (JL)
Jeep Wrangler Unlimited 4-Door (JL)
- 2024 Jeep Wrangler Unlimited 4-Door (JL)
- 2023 Jeep Wrangler Unlimited 4-Door (JL)
- 2022 Jeep Wrangler Unlimited 4-Door (JL)
- 2021 Jeep Wrangler Unlimited 4-Door (JL)
- 2020 Jeep Wrangler Unlimited 4-Door (JL)
- 2019 Jeep Wrangler Unlimited 4-Door (JL)
- 2018 Jeep Wrangler Unlimited 4-Door (JL)
Share Your Thoughts
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Questions
Jason G.
This is stated for a 2" lift. Is it good for a 2.5" or 3.5" lift? Thanks
With that size lift, a control arm geometry bracket would be suggested or using an adjustable control arm that is more appropriate for the 2-6" lift range. Yes, the control arm will still work, but your handling and geometry may not be at it's best if used with larger lifts. Thanks for your inquiry.
James B.
I used your system to see if it fits 2023 gladiator spot s but it says it does not fit. I am installing a BDS 2 inch lift kit and these are supposed to be the arms in the gladiator mopar 2 inch lift as well. Will this fit the gladiator models with 2 inches of lift?
These are not compatible with Gladiator JT models. Sorry for the inconvenience.
Mike C.
Do these work on the left and right side?
Yes. They are sold individually and they fit passenger or driver side. Thanks for your inquiry.