Mopar 68419016AB Floor Cargo Trail Rail for 2018 Jeep Wrangler JL Unlimited
The Mopar Floor Cargo Trail Rail mounts directly to your Jeep Wrangler Unlimited JL 4 door floor. Installing with 3 bolts on each side to existing holes in the floor allowing you to attach cargo rail tie down's. Giving you the ability to have more tie down points and firmly secure your gear in the cargo area of your Jeep. Each side is sold separate, so be sure to purchase both sides. No hardware included.
Please Note: You must purchase 6 bolts (M8-1.25x16mm), which are different from the factory bolts for installation.
Simple Cargo Floor Tie-down: Engineered for your Jeep Wrangler JL mounting to the cargo floor. Keep you gear, tool boxes, groceries, gas cans and whatever else you may haul secured down to the floor. Allowing you to attack the trails with confidence knowing your gear will not bounce around or even out of the Jeep.
Accepts Adjustable mounts: These easily slide to the desired position with the push of a button. Allowing for quick and convenient tie down points.
Warranty: Offering a 12 Month / 12,000 Mile Limited Warranty
- Color: Black & Silver
Jeep Wrangler Unlimited 4-Door (JL)
- 2024 Jeep Wrangler Unlimited 4-Door (JL)
- 2023 Jeep Wrangler Unlimited 4-Door (JL)
- 2022 Jeep Wrangler Unlimited 4-Door (JL)
- 2021 Jeep Wrangler Unlimited 4-Door (JL)
- 2020 Jeep Wrangler Unlimited 4-Door (JL)
- 2019 Jeep Wrangler Unlimited 4-Door (JL)
- 2018 Jeep Wrangler Unlimited 4-Door (JL)
Mopar Floor Cargo Trail Rail Options
| Part Number | Catalog # | Choose a Side | Price | |
|---|---|---|---|---|
| 68419017AB | 91109-6221 | Left (Driver Side) | $147.25 | |
| 68419016AB | 91109-6220 | Right (Passenger Side) | $147.25 |
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Mopar Floor Cargo Trail Rail Reviews
Very useful.
Easy install and fit great!
Works great on a 2019 JL Wrangler. Two quick (and obvious tips) for install: 1) the plastic D-ring covers are easy to take out but you need to flip up the plastic covers with a knife edge to access the screws. You can't re-use the original D-ring screws - the pan heads are too big for the slots. 2) when you buy the M8-1.25x16mm screws - get ones that can be driven in with an Allen head wrench from above. Don't buy hex head screws because you won't be able to turn them. One more thing - you have to buy the Mopar Loop Cargo Tie Downs separately - be sure to budget for that - they are about $30.00 each.
